中国车辆标准(GB vehicle
standards)
中国车辆标准(GB vehicle
standards)
火力发电厂辅助系统（车间）热工自动化设计技术规定
DL/T 569-2007
汽车、船舶运输煤样的人工采取方法
Methods for manual sampling of coal from tops of trucks and barges
DL/T 636-2006
带电作业用脚踏式500kV四分裂导线飞车
DL/T 854-2004
带电作业用绝缘斗臂车的保养维护及在使用中的试验
染整机械轧车线压力
普通轧车用不锈钢轧辊
普通轧车用橡胶轧辊
染整机械轧车线压力
铝制铁道罐车技术条件
Specifications for aluminium tank cars
机动工业车辆安全规范
Powered industrial trucks--Safety code
装用点燃式发动机重型汽车曲轴箱污染物排放限值及测量方法
Limits and measurement methods for crankcase pollutants From heavy-duty vehicles equipped with P.I engines
汽车座椅头枕性能要求和试验方法
Motor vehicles--Seats head vestraints--Performance requirements and test methods
乘用车正面碰撞的乘员保护
The protection of the occupants in the event of a frontal collision for passenger car
轿车内部凸出物
Passenger car--Internal protrusions
汽车及挂车后雾灯配光性能
Photometric characteristics of rear fog lampsfor motor vehicles and their trailers
汽车风窗玻璃除雾系统的性能要求及试验方法
Motor vehicles--Windshield demisters--Performance requirements and test methods
汽车风窗玻璃除霜系统的性能要求及试验方法
Motor vehicles--Windshield defrosters--Performance requirements and test methods
防止汽车转向机构对驾驶员伤害的规定
The stipulation protecting drivers from being injured by motor vehicle steering mechanism
汽车驾驶员前方视野要求及测量方法
Motor vehicles--Forward visibility for drivers--Requirements and measurement methods
机动车回复反射器
Retro refletor for motor vehicles
轿车风窗玻璃刮水器刮刷面积
Passenger cars--Windshield wipers--Wiped areas
轿车外部凸出物
Passenger car--External protrusions
汽车和挂车侧面防护要求
Motor vehicles and trailers--Lateral protectionrequirements
汽车和挂车后下部防护要求
Motor vehicles and trailers--Rear underrun protection requirements
汽车罩(盖)锁系统
Motor vehicles--Hood latch system
救助艇绞车
Rescue boat winch
汽车制动系统结构、性能和试验方法
Road vehicles--Braking systems--Structure，performance and test methods
汽车同步带
Automotive synchronous belts
机动车辆制动液
Motor vehicle brake fluids
机动轮椅车
Combustion-motor-driven wheelchairs
客车座椅及其车辆固定件的强度
The strength of the seats and their anchorages of passenger vehicles
客车结构安全要求
The safety requiements for bus construction
机动车排气火花熄灭器
Spark arrester
道路运输危险货物车辆标志
The vehicle mark for road transportation dangerous goods
汽车多楔带
Automotive V-ribbed belts
铁道机车辐射噪声限值
The limite of noise emitted by railbound locomotives
重负荷车辆齿轮油(GL-5)
Heavy duty gear oil for automobile(GL-5)
特种车辆标志灯具
Emergency vehicle warning lamps
车辆、船和由内燃机驱动的装置无线电骚扰特性限值和测量方法
Vehicles,boats,and internal combustion engine driven devices―Radio disturbance characteristics―Limits and methods of measurement
机动车成年乘员用安全带和约束系统
Safety belts and restraint systems for adult occupants of motor vehicles
汽车安全带安装固定点
Safety-belt anchorages for vehicles
白炽灯 安全要求 第3部分：卤钨灯(非机动车辆用)
城市轨道交通车站站台声学要求和测量方法
Acoustical requirement and measurement on station platform of urban rail transit
GB 146.1-1983
标准轨距铁路机车车辆限界
Rolling stock gauge for standard gauge railways
摩托车和轻便摩托车排气污染物排放限值及测量方法(怠速法)
Limits and measurement methods for exhaust emissions from motorcycles and mopeds at idle speed
摩托车污染物排放限值及测量方法(工况法,中国第III阶段)
Limits and measurement methods for the emissions of pollutants from motorcycles on the running mode(CHINA stage III)
轿车翻新轮胎
Retreaded tyre for passenger car
机车船舶用电加温玻璃第1部分：船用矩形窗电加温玻璃
Electrically heated glazing materials for locomotives and ships Part 1: Heated glass panes for ships'rectangular windows
机车船舶用电加温玻璃第2部分：机车电加温玻璃
Electrically heated glazing materials for railway rolling stock and ship Part 2: Electrically heated glazing materials for railway rolling stock
儿童自行车安全要求
Safety requirements for bicycles for young children
儿童三轮车安全要求
Safety requirements for child tricycles
儿童推车安全要求
Safety requirements for wheeled child conveyances
婴儿学步车安全要求
Safety requirements for baby walking frames
重型车用汽油发动机与汽车排气污染物排放限值及测量方法(中国III、IV阶段)
装用点燃式发动机重型汽车燃油蒸发污染物排放限值及测量方法（收集法）
Limits and measurement methods for fuel evaporative Pollutants from heavy-duty vehicles equipped with P.I engines(Trap method)
城市轨道交通列车噪声限值和测量方法
Noise limit and measurement for train of urban rail transit
汽车加速行驶车外噪声限值及测量方法
Limits and measurement methods for noise emitted by accelerating motor vehicles
汽车用车速表
汽车座椅、座椅固定装置及头枕强度要求和试验方法
Strength requirement and test of automobile seats, their anchorages and any head restraints
机动车辆后视镜的性能和安装要求
Motor vehicles - Rear view mirrors - Requirements of performance and installation
汽车风窗玻璃刮水器、洗涤器的性能要求及试验方法
Motor vehicles--Windshield wipers and washer systems--Performance requirements and test methods
汽车门锁及车门保持件的性能要求和试验方法
Motor vehicles - Door locks and door retention components - Performance requirements and test methods
汽车及挂车倒车灯配光性能
Photometric characteristics of reversing lamps for power-driven vehicles
摩托车操纵件、指示器及信号装置的图形符号
Symbols for controls，indicators and telltales for motorcycles
木工(材)车间安全生产通则
General rules to safety production of woodworking shop
汽车防盗装置
Protective devices against unauthorized use of motor vehicles
汽车和挂车号牌板(架)及其位置
The license plates (crackets) and its position on motor vehicles and trailer
机动车用喇叭的性能要求及试验方法
Performance requirements and test methods of horn for motor vehicles
轿车侧门强度
Passenger car--Strength of side doors
道路机动车辆灯泡 尺寸、光电性能要求
道路车辆外廓尺寸、轴荷及质量限值
Limits of dimensions，axle load and masses for road vehicles
农业机械运行安全技术条件 第5部分：挂车
摩托车和轻便摩托车加速行驶噪声限值及测量方法
Limit and measurement method of noise emitted by accelerating Motorcycles and Mopeds
汽车定置噪声限值
Limits of noise emitted by stationary road vehicles
消防车定型试验规程
Fire vehicle-engineering approval evaluation program
进口可用作原料的固体废物环境保护控制标准废汽车压件
Environmental protection control standard for imported solid wastes as raw materials -- compressed piece of scrap automobile
道路车辆车辆识别代号(VIN)
Road vehicle--Vehicle identification number(VIN)
道路车辆世界制造厂识别代号(WMI)
Road vehicle--World manufacturer identifier(WMI)code
汽车用压缩天然气钢瓶
Steel cylinders for the on-board of compressednatural gas as a fuel for vehicles
机动车用液化石油气钢瓶
Steel cylinders for the liquefied petroleum gasfor vehicles
汽油机助力自行车
Gasoline engine boosting bicycle
摩托车和轻便摩托车后视镜及其安装要求
Motorcycles and mopeds rear-view-mirrors requirement of performance and installation
摩托车和轻便摩托车转向锁止防盗装置
Protective devices against unauthorized use-steering-locking for motorcycles and mopeds
汽车前、后端保护装置
Front and rear protective devices for passenger cars
汽车和挂车转向信号灯配光性能
Photometric characteristics of direction indicators for motor vehicles and their trailers
摩托车光信号装置配光性能
Photometric characteristics of light-signalling devices for motorcycles
汽车转向系基本要求
Steering system of motor vehicles--Basic requirements
车用压燃式、气体燃料点燃式发动机与汽车排气污染物排放限值及测量方法（中国III、IV、V阶段）
Limits and measurement methods for exhaust pollutants from compression ignition and gas fuelled positive ignition engines of vehicles (III, IV, V)
电动自行车通用技术条件
Electric bicycles--General technical requirements
机械式停车设备通用安全要求
Mechanical parking systems--General safety requirement
车用压缩天然气瓶阀
Valves for compression natural gas cylinders for vehicles
Gasoline for motor vehicles
铁路车辆用安全玻璃
Safety glass for railway rolling stock
车用压缩天然气
Compressed natural gas as vehicle fuel
汽车制造厂卫生防护距离标准
Health protection zone standard for auto-mobile factory
汽车及挂车侧标志灯配光性能
Photometric characteristics of side-markerlamps for motor vehicles and their trailers
两轮摩托车及轻便摩托车照明和光信号装置的安装规定
Provisions for installation of two wheel motorcycle and moped lighting and light-signalling devices
赛车类游艺机通用技术条件
Specifications of amusement rides fairy racing category
观览车类游艺机通用技术条件
Specifications of amusement rides wonder wheel category
小火车类游艺机通用技术条件
Specifications of amusement rides fairy train category
架空游览车类游艺机通用技术条件
Specifications of amusement rides monorail category
碰碰车类游艺机通用技术条件
Specifications of amusement rides bumper car category
电池车类游艺机通用技术条件
Specifications of amusement rides batterycar category
轻便摩托车污染物排放限值及测量方法(工况法，中国第III阶段)
Limits and measurement methods for emissions of pollutants from mopeds on the running mode(CHINA stage III)
点燃式发动机汽车排气污染物排放限值及测量方法（双怠速法及简易工况法）
Limits and measurement methods for exhaust pollutants from vehicles equipped ignition engine under two-speed idle conditions and simple driving mode conditions
汽车燃油箱安全性能要求和试验方法
Safety property requirements and test methods for automobile fuel tank
机动车用液化石油气钢瓶集成阀
Automotive LPG steel cylinder multivalve
农用运输车安全技术要求
Agricultural vehicles--Safety requirements
农用运输车自由加速烟度排放限值及测量方法
Limits and measurement methods for smoke at free acceleration from agricultural vehicles
车用乙醇汽油
Ethanol gasoline for motor vehicles
轻型汽车污染物排放限值及测量方法(I)
Limits and measurement methods foremissions of pollutants from light-duty vehicles(Ⅰ)
轻型汽车污染物排放限值及测量方法（中国III、IV阶段）
Limits and measurement methods for emissions from light-duty vehicles
汽车及挂车后牌照板照明装置配光性能
Photometric characteristics of devices for the illumination of rear registration plates of motor vehicles and theirtrailers
汽车驻车灯配光性能
Photometric characteristics of parking lamps for power-driven vehicles
轮机日志和车钟记录簿
Engine log book and record book of engine order telegraph
机动车驾驶员身体条件及其测评要求
Physical qualifications for automobile drivers and their test protocol
道路运输液体危险货物罐式车辆 第1部分: 金属常压罐体技术要求
Road tanker for dangerous liquid goods transportation―Part 1: Technical requirements of atmospheric pressure metal tank
营运车辆综合性能要求和检验方法
Multiple performance requirement and detecting methods for commercial vehicles
用于保护车载接收机的无线电骚扰特性的限值和测量方法
Limits and methods of measurement of radio disturbance characteristics for the protection of receivers used on board vehicles
GB 188-1963
762毫米轨距铁路机车车辆限界和建筑接近限界分类及基本尺寸
Locomotive and car clearance boundary and structure clearance boundary for 762mm gauge railways--Classification and basic dimensions
轻型客车结构安全要求
The safety requirements for light bus construction
体育场所开放条件与技术要求第2部分:卡丁车场所
Operation conditions and technical requirements for gymnasium and playground Part 2:karting Circuit
机动车用三角警告牌
Warning triangles for motor vehicle
轻便摩托车前照灯配光性能
Photometric characteristics of moped headlamps
车用液化石油气
Automotive liquefied petroleum gas
竞赛类卡丁车通用技术条件
Common techniai conditions for racing kartig
普及(娱乐)类卡丁车通用技术条件
Common techniai conditions for popular karting
卡丁车分类与注册
Kart classification and homologation
卡丁车场建设规范
Criteria of karting circuit construction
医疗废物转运车技术要求(试行)
Technical standard for medical waste transport vehicle
在用燃气汽车燃气供给系统泄漏安全技术要求及检验方法
Technique requirement and test method of leaking-safety of gas supply system on using gas vehicle
摩托车和轻便摩托车燃油箱安全性能要求和试验方法
Safety property requirements and test method for fuel tanks of motorcycles and mopeds
车辆驾驶人员血液、呼气酒精含量阈值与检验
Blood-breath alcohol concentration and examination for driving
汽车用压缩天然气钢瓶定期检验与评定
Periodic inspection and evaluation of steel gas cylinders for the on board storage of compressed natural gas as a fuel
乘用车燃料消耗量限值
Limits of fuel consumption for passenger cars
车用汽油清净剂
Detergent additive for vehicular gasoline
三轮汽车和低速货车用柴油机排气污染物排放限值及测量方法（中国I、II阶段）
Limits and measurement methods for exhaust pollutants from diesel engines of tr-wheellow-speed goods vehicles
三轮汽车和低速货车加速行驶车外噪声限值及测量方法(中国I、II阶段)
Limits and measurement methods for noise emitted by accelerating tri-wheel and low-speed vehicle
摩托车和轻便摩托车排气烟度排放限值及测量方法
Limits and measurement methods for exhaust smoke emissions from motorcycles and mopeds
爆炸性环境用工业车辆防爆技术通则
General rules of explosion-proof techniques of industrial trucks for explosive atmospheres
汽车侧面碰撞的乘员保护
The protection of the occupants in the event of a lateral collision
乘用车后碰撞燃油系统安全要求
The requirements of fuel system safety in the event of rear-end collision for passenger car
摩托车和轻便摩托车 制动性能要求及试验方法
Performance and measurement method for braking of motorcycles and mopeds
摩托车和轻便摩托车外部凸出物
External projections from motorcycles and mopeds
摩托车乘员扶手
Passenger hand-holds on motorcycles
矿用辅助绞车安全要求
Mine auxiliary winders Safety requirements
矿井提升机和矿用提升绞车安全要求
Mine hoists and mine windersSafety requirements
商用车驾驶室外部凸出物
The cab of commercial vehicles-External projections
道路运输爆炸品和剧毒化学品车辆安全技术条件
Safety specifications for road transportation vehicle of explosive substance and chemical toxic substance
机动车用液化石油气的橡胶软管和软管组合件
Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles―Specification
机动车用液化石油气钢瓶定期检验与评定
Periodic inspection and evaluation of steel gas cylinders for the liquefied petroleum gas for vehicles
车辆防盗报警系统 乘用车
Vehicle security alarm systems - Passenger cars
重型汽车排气污染物排放控制系统耐久性要求及试验方法
Test procedures and requirement of durability of emission control systems for heavy-duty vehicles
汽车用液化石油气蒸发调节器
Vaporizer /pressure regulator of LPG vehicle
轻型商用车辆燃料消耗量限值
Limits of fuel consumption for light duty commercial vehicles
摩托车和轻便摩托车燃油蒸发污染物排放限值及测量方法
Limits and measurement methods for evaporative pollutants from motorcycles and mopeds
矿用人车 安全要求
Mine manriding cars with narrow gauge - Safety requirements
奥林匹克专用车道标志和标线
Sign and marking of special lane for Olympic vehicles
汽车用气体放电光源前照灯
Headlamps equipped with gas - discharge light sources for motor vehicle
汽车用前照灯清洗器
Headlamp cleaner
三轮汽车 燃料消耗量限值及测量方法
低速货车 燃料消耗量限值及测量方法
地下矿用无轨轮胎式运矿车 安全要求
橡胶加工炼胶车间防尘规程
危险货物运输车辆结构要求
乘用车制动系统技术要求及试验方法
机动车安全技术检验项目和方法
Items and methods of power-driven vehicles safety technology inspection
散装水泥车罐体安全质量
报废汽车回收拆解企业技术规范
自行车安全要求
Safety requirements for bicycles
车用压燃式发动机和压燃式发动机汽车排气烟度排放限值及测量方法
Limits and measurement methods for exhaust smoke from C.I.E. (Compression Ignition Engine) and vehicle equiped with C.I.E.
汽车操纵件、指示器及信号装置的标志
Motor vehicles--Symbols for controls，indicators and tell-tales
摩托车和轻便摩托车定置噪声限值及测量方法
Limit and measurement method of noise emitted by stationary Motorcycles and Mopeds
汽车用灯丝灯泡前照灯
Motor vehicle headlamps equipped with filament lamps
汽车用灯丝灯泡前雾灯
Motor vehicle front fog lamps equipped with filament lamps
家用和类似用途电器的安全住宅用垂直运动车库门的驱动装置的特殊要求
Safety of household and similar electrical appliances--Particular requirements for drives for verti-cally moving garage doors for residential use
汽车及挂车外部照明和光信号装置的安装规定
Prescription for installation of the external lighting and light-signalling devices for motor vehicles and their trailers
铁路机车、车辆车轴用钢
Axles steel for railway locomotive and wagons
GB 518-2007
摩托车轮胎
Motorcycle tyres
汽车用制动器衬片
Brake linings for automobiles
机车司机室瞭望条件
Visibility conditions for driver’s cabs of locomotives
机车司机室前窗、侧窗及其他窗的配置
Position of front and side windows and other windows for driver’s cabs of locomotives
汽车及挂车前位灯、后位灯、示廓灯和制动灯配光性能
Photometric characteristics of front and Rear position lamps，end-outline marker lamps and stop lamps for motor vehicles and and their trailers
摩托车白炽丝光源前照灯配光性能
Photometric characteristics of motocycle headlamps epuipped with filament light sources
机车司机室特殊安全规则
Special safety regulations for driver’s cabs of locomotives
电力机车防火和消防措施的规程
Regulations relating to fire preventive and fighting measures for electric locomotives
充气轮胎内胎第1部分:汽车轮胎内胎
Inner tube of pneumatic tyres--Part1:Inner tube of automobile tyres
充气轮胎内胎 第2部分：摩托车轮胎内胎
Inner tube of pneumatic tyres - Part 2: Inner tube of motorcycle tyres
载重汽车翻新轮胎
Retreaded tyre for truck
汽车护轮板
The wheel guards of motor vehicles
汽车气压制动胶管
Rubber hose for automotive air brake system
机动车运行安全技术条件
Safety specifications for power-driven vehicles operating on roads
铁路机车车辆制动用橡胶软管
Rubber brake hoses for railway locomotive and car
消防车消防性能要求和试验方法
Fire performance requirements and test methods for vehicle
车用电子警报器
Vehicle-used electronic siren
推车式灭火器
Wheeled fire extinguishers
GB 811-1998
摩托车乘员头盔
Helmets for motorcycle users
汽车内饰材料的燃烧特性
Flammability of automotive interior materials
铁路用辗钢整体车轮
Rolled solid wheels for railway
汽车安全玻璃
Safety glazing materials for road vehicles
Passenger car tyres
载重汽车轮胎
Truck tyres
中华人民共和国铁路车站站名代码
Code for railway stations of the People’s Republic of China
带传动同步带传动汽车同步带轮
Belt drives--Synchronous belt drives--Automotive pulleys
液化气体铁道罐车
Railway tank car for liquefied gases
道路车辆 外部照明和光信号装置 环境耐久性
Road vehicles - Lighting and light-signalling devices - Environmental endurance
汽车同步带物理性能试验方法
Synchronous belt drives--Automotive belt--Determination of physical properties
工矿电机车重量测定方法
Method of mass measurement for industrial and mining electric locomotive
机夹切断车刀
Cutting-off tools for turning with clamp tips
机夹螺纹车刀
Turning tools for threads with clamp tips
车用流体润滑剂低温粘度测定法 (勃罗克费尔特粘度计法)
Automotive fluid lubricants--Determination of low-temperature viscosity--Brookfield viscometer method
带传动 汽车工业用V带 疲劳试验
机动车安全检测设备检定技术条件第1部分:滑板式汽车侧滑试验台检定技术条件
Motor vehicle safety testing equipment--Technical requirements of verification--Part 1:Technical requirements of verification for side slip tester of slipper type
机动车安全检测设备检定技术条件第2部分:滚筒反力式制动试验台检定技术条件
Motor vehicle safety testing equipment--Technical requirements of verification--Part 2:Technical requirements of verification for opposite force roller brake tester
机动车安全检测设备检定技术条件第3部分:汽油车排气分析仪检定技术条件
Motor vehicle safety testing equipment--Technical requirements of verification--Part 3:Technical requirements of verification for gasoline motor vehicle emission analyzer
机动车安全检测设备检定技术条件第4部分:滚筒式车速表试验台检定技术条件
Motor vehicle safety testing equipment--Technical requirements of verification--Part 4:Technical requirements of verification for speedometer tester of roller type
机动车安全检测设备检定技术条件第5部分:滤纸式烟度计检定技术条件
Motor vehicle safety testing equipment--Technical requirements of verification--Part 5:Technical requirements of verification for filter type smokemeter
机动车安全检测设备检定技术条件第6部分:对称光前照灯检测仪检定技术条件
Motor vehicle safety testing equipment--Technical requirements of verification--Part 6:Technical requirements of verification for symmetrical beam headlamp tester
机动车安全检测设备检定技术条件第7部分:轴(轮)重仪检定技术条件
Motorvehicle safety testing equipment--Technical requirements of verification--Part 7:Technical requirements of verification for Axle(Wheel) load scales
机动车安全检测设备检定技术条件第8部分:摩托车轮偏检测仪检定技术条件
Motor vehicle safety testing equipment--Technical requirements of verification--Part 8:Technical requirements of verification of motorcycle wheel deviation tester
机动车安全检测设备检定技术条件第9部分:平板制动试验台检定技术条件
Motor vehicle safety testing equipment--Technical requirements of verification--Part 9:Technical requirements of verification for platform brake tester
远洋船用拖曳绞车
Towing winches for deep sea use
客车装载质量计算方法
Laden mass calculating method for buses
电视车通用技术条件
Generic specification for TV vans
交流额定电压3kV及以下轨道交通车辆用电缆
汽车道路试验方法通则
Motor vehicles--General rules of road test method
汽车起动性能试验方法
Motor vehicle - Starting performance - Test method
汽车滑行试验方法
Motor vehicles--Coastdown--Test method
汽车牵引性能试验方法
Motor vehicles--Towing performance--Test method
两轴道路车辆重心位置的测定
Road vehicles with two axles--Determination of centre of gravity
汽车爬陡坡试验方法
Motor vehicles--Steep hill climbing--Test method
汽车最小转弯直径测定方法
Motor vehicles--Minimum turning diameter--Method of measurment
汽车地形通过性试验方法
Motor vehicles--Passing topography capacity--Test method
汽车发动机冷却系冷却能力道路试验方法
Motor vehicles--Cooling capacity for engine cooling system--Test method on road
汽车加速性能试验方法
Motor vehicles--Acceleration performance--Test method
汽车最高车速试验方法
Motor vehicles--Maximum speed--Test method
乘用车燃料消耗量试验方法
Passenger car--Fuel consumption test method
商用车辆燃料消耗量试验方法
Commercial vehicle--Fuel consumption test method
汽车隔热通风试验方法
Motor vehicle - Ventilation and heat Insulation - Test method
汽车最低稳定车速试验方法
Motor vehicles--Minimum stable speed--Test method
汽车速度表、里程表检验校正方法
Motor vehicles--Speedometer and odometer--Calibration method
汽车操纵稳定性术语及其定义
Automotive controllability and stability--Terms and definitions
汽车主要尺寸测量方法
Molor vehicles--Basic dimensions--Measuring method
汽车质量(重量)参数测定方法
Motor vehicles--Weight parameter--Measuringmethod
汽车技术状况行驶检查方法
Motor vehicles--Technical condition--Inspection method
汽车可靠性行驶试验方法
Reliability running test method for automobiles
汽车耐久性行驶试验方法
Motor vehicles--Durability running--Test method
自行车检测设备和器具技术条件
The specifications of testing equipment and measuring appliance for bicycle
汽车采暖性能要求和试验方法
Motor vehicle - Heating performance requirement - Test method
铁道客车内部噪声限值及测量方法
The limiting value and measurement method for the interior noise in the railway passenger coach
铁道客车通用技术条件
General technical specification for railway passenger car
铁道客车组装后的检查与试验规则
Rules for inspecting and testing of railway passenger car after completion of construction
工业车辆轮辋规格系列
Rims series for industrial vehicles
电动轮椅车
Electric wheelchairs
带电作业用绝缘滑车
Insulated pulleys for live working
客车定型试验规程
Bus and coach - Engineering approval evaluation process
客车车内尺寸
汽车悬架用空气弹簧橡胶气囊
Air spring for automotive suspension--Rubber bellows
摩托车轮辋系列
Series of motorcycle rims
摩托车轮胎性能试验方法
Test methods for verifying capabilities of motorcycle tyre
铁路客车用铅酸蓄电池
载货汽车定型试验规程
Trucks--Engineering approval evaluation program
带传动　汽车工业用V带及其带轮 尺寸
各色汽车用面漆
Finishes for automobiles
汽车用底漆
Primere for automobiles
滚筒式汽车车速表检验台
Roller automobile speedometer tester
滚筒反力式汽车制动检验台
Roller opposite forces type automobile brake tester
机动车和挂车防抱制动性能和试验方法
Antilock braking performance and test procedure for motor vehicles and their trailers
铁道车辆乘客及乘务员所承受的振动的测量与分析
Mechanical vibration--Measurement and analysis of vibration to which passengers and crew are exposed in railway vehicles
手动轮椅车
Manual wheelchairs
地面车辆机械振动测量数据的表述方法
Mechanical vibrations--Land vehicles--Method for reporting measured data
货运挂车产品质量检查试验规程
Test-rules of products quality inspection for trailers
货运挂车试验方法
Trailer--Test procedure
道路车辆 牵引座互换性
Road vehicles - Fifth wheels - Interchangeability
牵引车与挂车之间气制动管连接器
Pneumatic braking connections between motor vehicles and towed vehicles
Accommodation ladder winches
卤钨灯(非机动车辆用)性能要求
Tungsten halogen lamps(non-vehicle)Performance requirements
汽车制动液类别图形标志
Motor vehicles--Graphical symbols to designate brake fluid types
汽车气制动系管路螺纹孔和管接头外螺纹
Motor vehicles--Pneumatic brakingsystems--Tapped holes and male fittings
汽车静侧翻稳定性台架试验方法
Static roll stability test method for motor vehicles
摩托车链条技术条件和试验方法
Motor cycle chains--Characteristics andtest methods
可转位内孔车刀
Boring bars for indexable inserts
声学机动车辆定置噪声测量方法
Acoustics--Measurement of noise emittedby stationary road vehicles
Industrial wheels
轮椅车术语
Wheelchair--Terms
农林拖拉机和机械 车轮侧向负载疲劳试验方法
农林拖拉机和机械 驱动车轮扭转疲劳试验方法
公路车辆用高压点火电线第1部分一般规定
High tension ignition wires for road vehicle--Part 1--General
公路车辆用高压点火电线第2部分铜芯高压点火电线
High tension ignition wires for road vehicle--Part 2--Copper conductor high tension ignition wires
公路车辆用高压点火电线第3部分阻尼芯高压点火电线
High tension ignition wires for road vehicle--Part 3--Damping conductor high tension ignition wires
城市轨道交通车辆组装后的检查与试验规则
Rules for inspecting and testing of urbar rail transit vehicles after completion of construction
汽车节油技术评定方法
Measurement method of fuel saving technology for automobiles
摩托车操纵稳定性术语坐标系和运动
Motorcycles--Terminology of controllability and stability--Basic principles of axis systems and kinematies
摩托车操纵稳定性术语车轮和轮胎
Motorcycles--Terminology of controllability and stability--Wheels and tyres
摩托车操纵稳定性术语方向操纵系统
Motorcycles--Terminology of controllability and stability--Steering system
摩托车操纵稳定性术语空气动力特性
Motorcycles--Terminology of controllability and stability--Aerodynamic characteristics
汽车牵引车与全挂车机械连接装置强度试验
Motor vehicles--Drawbar couplings and eyes for hinged drawbars--Strength test
汽车半挂车牵引座牵引销强度试验
Motor vehicles--Fifth wheel coupling pins--Strength test
机动车辆及挂车分类
Classification of power-driven vehicles and trailers
Shaft sinking winch
Dispatching winch
铁路车站及枢纽术语
Terminology for railway station and terminal
摩托车和轻便摩托车驻车性能要求
Motorcycle and moped parking performance requirements
摩托车和轻便摩托车驻车性能试验方法
Motorcycle and moped parking performance test method
摩托车操纵装置的型式、位置及基本要求
Types，positions and performance requirements for controls of motorcycles
摩托车和轻便摩托车三轮车零部件名称
Motorcycles and mopeds--Part and component designations for vehicle with three wheels
普通木工车床精度
Woodworking machines--Turning lathes--Accuracy tests
手动轮椅车强度试验方法
Strength tests for manual wheelchairs
电动轮椅车气候试验方法
Climatic tests for electric wheelchairs
公共信息导向系统 设置原则与要求 第3部分：铁路旅客车站
Guidance system for public information - Setting principles and requirements - Part 3: Railway passenger station
公共信息导向系统 设置原则与要求 第4部分: 公共交通车站
Guidance system for public information - Setting principles and requirements - Part 4: Public transport station
轿车车轮冲击试验方法
Passenger cars--Wheels--Impact test procedure
载货汽车驾驶员操作位置尺寸
Trucks--Operating position demensions of driver
交流电气化铁道电力机车运行产生的无线电辐射干扰的测量方法
Measurement method of radiated radio interference caused by moving electric locomotive on AC electrified railways
摩托车和轻便摩托车燃油消耗量限值
Fuel consumption limited value for motorcycles and mopeds
汽车修理质量检查评定标准整车大修
The standard of qualitative assessment for vehicle repair--Major repair of vehicles
汽车修理质量检查评定标准发动机大修
The standard of qualitative assessment for vehicle repair--Major repair of automobile engines
汽车修理质量检查评定标准车身大修
The standard of qualitative assessment for vehicle repair--Major repair of bodies
道路机动车辆灯泡 性能要求
Lamps for road vehicles - Performance requirements
厂内机动车辆安全检验技术要求
Safe examinations and technical requirements for the automobiles in gates of factories
设备用图形符号第6部分: 运输、车辆检测及装载机械通用符号
Graphical symbols for use on equipment--Part 6: Common symbols for conveying，vehicle testing and loading machine
单刃车削刀具寿命试验
Tool-life testing with single-point turning tools
数控车床和车削中心检验条件 第1部分：卧式机床几何精度检验
Test conditions for numerically controlled turning machines and turning centers - Part 1: Geometric test for machines with a horizontal workholding spindle
数控车床和车削中心检验条件 第4部分：线性和回转轴线的定位精度及重复定位精度检验
Test conditions for numerically controlled turning machines and turning centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes
摩托车和轻便摩托车燃油消耗试验方法
Motorcycles and mopeds--Measurementmethod for fuel consumption
汽车柴油机架装直列式喷油泵安装尺寸
Motor vehicles--Cradle-mounted in-line fuel injection pumps for diesel engines--Mounting dimensions
三轮摩托车和三轮轻便摩托车最大侧倾稳定角试验方法
The test method of maximum stable side-inclination for motorcycle and moped with three wheels
道路车辆世界零件制造厂识别代号(WPMI)
Road vehicler--World parts manufacturer identifier (WPMI) code
汽车维修业开业条件第1部分:汽车整车维修企业
Certification requirements for motor vehicle maintenance and repair enterprise--Part 1:for motor vehiclemaintenance and repair
汽车维修业开业条件第2部分:汽车专项维修业户
Certification requirements for motor vehicle maintenance and repair enterprise--Part 2:for maintenance and repair of special items
卧铺客车结构安全要求
标准轨距铁路机车车辆限界检查 第1部分：检查方法
Checking of rolling stock clearance for standard gauge railways - Part 1：Methods for inspecting
标准轨距铁路机车车辆限界检查 第2部分：限界规
Checking of rolling stock clearance for standard gauge railways - Part 2：clearance treadle
工业自动化车间生产第1部分:标准化参考模型和确定需求的方法论
Industrial automation--Shop floor production--Part 1:Reference model for standardization and a methodology for identification of requirements
工业自动化车间生产第2部分:标准化参考模型和方法论的应用
Industrial automation--Shop floor production--Part 2:Application of the reference model forstandardization and methodology
内燃机车柴油机油
Railroad diesel engine oils
声学市区行驶条件下轿车噪声的测量
Acoustics--Measurement of noise emitted by passenger cars under conditions representative of urban driving
残疾人自行车和射箭运动员医学和功能分级
Medical and functional classification of cycling and archery for disabled athletes
货运全挂车通用技术条件
Technical requirements for freight full trailers
汽车安全玻璃耐化学浸蚀性和耐温度变化性试验方法
Road vehicles--Safety glazing materials--Test methods for resistant-to-chemicals and resistant-to-temperature changes
汽车安全玻璃的尺寸、形状及外观
Road vehicles--Safety glasses--Dimensions，shapes and appearances
轿车脚踏板的侧向间距
Passenger cars--Lateral spacing of foot controls
商用道路车辆尺寸代码
Commercial road vehicles--Dimensional codes
道路车辆汽车诊断系统词汇
Road vehicles--Diagnostic systems for motor vehicles--Vocabulary
道路车辆汽车诊断系统图形符号
Rord vehicle--Diagnostic system--Graphical symbols
专用汽车和专用半挂车术语和代号
Terms and marks in special automobiles and semi-trailers
汽车车轮双轮中心距
Dual spacing of vechicle wheels
铁道特种车辆和轨行机械动力学性能评定及试验方法
Dynamic performance evaluation and test method for particular class vehicles and tracked machine
汽车制动器衬片摩擦性能评价小样台架试验方法
Road vehicles--Brake linings--Evaluation of friction material characteristics--Small sample bench test procedure
客车上部结构强度的规定
Provisions of strength for the superstructure of bus
机动车电子电器组件的电磁辐射抗扰性限值和测量方法
Limits and methods of testing for immunity of electrical/electronic sub-assemblies in vehicles to electromagnetic radiation
天然气汽车和液化石油气汽车标志
Natural gas vehicle and liquefied petroleumgas vehicle--Identification marks
汽车用发动机净功率测试方法
Measurement methods of net power for automotive engines
长途客车内空气质量要求
Hygienic standard for the air quality inside long distance coach
轿车手操纵件、指示器及信号装置的位置
Passenger cars--Location of hand controls，indicators and tell-tales
天然气汽车和液化石油气汽车词汇
Natural gas vehicle and liquefied petroleum gas vehicle--Vocabulary
工业车辆叉车货叉在使用中的检查和修复
Industrial trucks--Inspectionand repair of fork arms in service on fork-lift trucks
土方机械翻车保护结构试验室试验和性能要求
Earth-moving machinery--Roll-over protective structures--Laboratory tests and performance requirements
汽车用石英钟
Quartz clocks vehicles
工业车辆电动车辆牵引用铅酸蓄电池优先选用的电压
Industrial trucks--Lead-acid traction batteries for electric trucks--Preferred voltages
硬质合金车刀第1部分:代号及标志
Turning tools with carbide tips--Part1:Designation and marking
硬质合金车刀第2部分:外表面车刀
Turning tools with carbide tips--Part2:External tools
硬质合金车刀第3部分:内表面车刀
Turning tools with carbide tips--Part3:Internal tools
汽车综合性能检测站能力的通用要求
General requirements for the competence of automotive multiple-function test station
轮椅车座(靠)垫阻燃性的要求和测试方法
Wheelchairs--Resistance to ignition of upholstered parts--Requirements and test methods
汽车同步带疲劳试验方法
Automotive synchronous belt industry--Fatigue test
摩托车维修业开业条件
Requirements for industry of motorcycle maintenance and repair being managed
汽车鼓式制动器修理技术条件
Technical specifications for motor vehicle drum brake being overhauled
汽车制动传动装置修理技术条件气压制动
Specifications for automobile braking transmission device being overhauled--Air braking
汽车制动传动装置修理技术条件液压制动
Specifications for automobile braking transmission device being overhauled--Hydraulic braking
汽车动力性台架试验方法和评价指标
Test-bed methods and evaluating index of dynamic property for motor vehicles
汽车发动机性能试验方法
Performance test code for road vehicle engines
质量管理体系汽车生产件及相关服务件组织应用GB/T 的特别要求
Quality management systems--Particular requirements for the application of ISO
for automotive production and relevant service part organizations
电动道路车辆用铅酸蓄电池
Lead-acid batteries for electric vehicles
电动道路车辆用金属氢化物镍蓄电池
Nickel-metal hydride batteries of electric road vehicles
汽车盘式制动器修理技术条件
Specification for automobile disk brakes being overhauled
汽车维护、检测、诊断技术规范
Specification for the inspection and maintenance of motor vehicle
汽车用压缩天然气加气口
Filling receptacle of CNG vehicle
汽车用液化石油气加气口(螺旋式)
Filling receptacle of LPG vehicle(Spird)
汽车用液化石油气加气口第2部分:快插式
Filling receptacle of LPG vehicle-Part 2:Insert
汽油车用催化转化器的技术要求和试验方法
Requirements and measurement methods of catalytic converters for petrol vehicles
电动汽车安全要求第1部分:车载储能装置
Electric vehicles--Safety specification--Part 1:On-board energy storage
电动汽车安全要求第2部分:功能安全和故障防护
Electric vehicles--Safety specification--Part 2:Funct-ional safety means and protection against failures
电动汽车安全要求第3部分:人员触电防护
Electric vehicles--Safety specification--Part 3:Protection of persons against electric hazards
电动汽车动力性能试验方法
Electric vehicles Power performance Test method
电动汽车能量消耗率和续驶里程试验方法
Electric vehicles Energy consumption and range Test procedures
电动车辆的电磁场发射强度的限值和测量方法,宽带,9kHz～30MHz
电动汽车定型试验规程
Electric vehicles-Engineering approval evaluation program
车辆识别代号条码标签
Vehicle identification number bar-code label
道路车辆产品标牌
Road vehicle--Manufacturer’s plate
燃气汽车改装技术要求压缩天然气汽车
The technical criterion of refitting for vehicle by using gas--Compressed natural gas for vehicle(CNGV)
燃气汽车改装技术要求液化石油气汽车
The technical criterion of refitting for vehicle by using gas--Liquefied petroleum gas for vehicle(LPGV)
电动车辆传导充电系统一般要求
Electric vehicle conductive charging system--Part 1:General requirements
电动车辆传导充电系统电动车辆与交流/直流电源的连接要求
Electric vehicle conductive charging system--Electric vehicles requirements for conductiveconnection to an A.C./D.C.supply
电动车辆传导充电系统电动车辆交流/直流充电机(站)
Electric vehicle conductive charging system--A.C./D.C.electric vehicle charging station
电动汽车用电机及其控制器 第1部分：技术条件
The electrical machines and controllers for electric vehicles - Part 1：General specification
电动汽车用电机及其控制器 第2部分：试验方法
The electrical machines and controllers for electric vehicles - Part 2: Test methods
汽车轮胎动平衡试验方法
Dynamic balance test method for motor vehicle tyres
汽车轮胎均匀性试验方法
Uniformity test method for motor vehicle tyres
运输车辆能源利用检测评价方法
Inspection and evaluation method of energy utilization for commercial vehicle
声学汽车车内噪声测量方法
Acoustics--Measurement of noise inside motor vehicles
机械振动评价车辆座椅振动的实验室方法第1部分:基本要求
Mechanical vibration--Laboratory method for evaluating vehicle seat vibration--Part 1:Basic requirements
铁路货车翻车机和散装货物解冻库检测技术条件
Inspecting specification for railway wagon dumper and bulk cargo unfreezing warehouse
机动工业车辆制动器性能和零件强度
Powered industrial trucks--Brake performance and components strength
摩托车变速V带
The variable speed drive V-belts for motor-cycle
汽车轮胎滚动阻力试验方法
Test methods of rolling resistance for motor vehicle tyres
汽油车排气净化催化剂
Catalyst for petrol vehicle exhaust purification
轿车和轻型商用车辆冷却系统用纯胶管和橡胶软管
Rubber--Coolant hoses and tubing for use on private cars and light commercial vehicles--Specification
摩托车和轻便摩托车底盘测功机的设定惯性滑行法
Chassis dynamometer setting for motorcycles and mopeds--Coastdown method
汽车发动机可靠性试验方法
Reliability test methods for motor vehicle engines
汽车行驶记录仪
Vehicle travelling data recorder
农用运输车照明与信号装置的安装规定
Agricultural vehicles--Prescription for installation of lighting and light signalling devices
农用运输车制动系统结构、性能和试验方法
Agricultural vehicles--Braking system--Structure，performance and test methods
农用运输车转向系
Agricultural vehicles--Steering system
农用运输车操纵件、指示器及信号装置的符号
Agricultural vehicles--Symbols for controls，indicators and telltales
农用运输车转向信号灯配光性能
Agricultural vehicles--Photometric characteristics of turn signal lamps
农用运输车前照灯
Agricultural vehicles--Head lamps
农用运输车前位灯、后位灯和制动灯配光性能
Agricultural vehicles--Photometric characteristics of front and rear position lamps，stop lamps
农用运输车座椅系统强度要求及试验方法
Agricultural vehicles--Seat systems--Strength requirements and test methods
农用运输车车辆识别标识
Agricultural vehicles--Vehicle identificationcode
农用运输车回复反射器
Agricultural vehicles--Retro reflector
农用运输车电喇叭性能要求及试验方法
Agricultural vehicles--Electrichorn--Performance requirement and test methods
农用运输车车速表使用性能
Agricultural vehicles--Performance of speedmeters
农用运输车号牌板(架)及其位置
Agricultural vehicles--License plates(crackets) and it’s position
农用运输车最大侧倾稳定角试验方法
Agricultural vehicles--Maximum stable side-inclination--Test method
农用运输车后视镜性能和安装要求
Agricultural vehicles--Rear view mirrors--Requirments of performance and installation
农用运输车倒车灯配光性能
Agricultural vehicles--Photometric characteristics of reversing lamps
Automobile diesel fuels
轻型汽车燃料消耗量试验方法
乘用车尺寸代码
Dimensional codes for passenger cars
汽车用压缩天然气加气机
Compressed natural gas dispenser for vehicle
汽车用液化石油气加气机
Liquefied petroleum gas dispenser for vehicle
液化石油气汽车专用装置的安装要求
Mounting requirements of special equipment for liquefied petroleum gas vehicles
压缩天然气汽车专用装置的安装要求
Mounting requirements of special equipment for compressed natural gas vehicles
低地板及低入口城市客车结构要求
Structure requirements of low floor city-bus and low entry city-bus
轿车轮胎滚动周长试验方法
Test methods of measuring rolling circumference for passenger car tyres
载重汽车轮胎滚动周长试验方法
Test method of measuring rolling circumference for truck tyres
汽车GPS导航系统通用规范
General specification for in-vehicle GPS navigation system.
客运地面缆车技术规范
Technology code for passengers funiculars
农业车辆挂车和牵引车的机械连接第1部分:牵引钩尺寸
Agricultural vehicles--Mechanical connections between towed and towing vehicles--Part 1:Dimensions of hitch-hooks
圆柱柄刀夹第3部分:装径向矩形车刀的B型刀夹
Tool holders with cylindrical shank--Part 3:Type B with rectangular radial seat
圆柱柄刀夹第4部分:装轴向矩形车刀的C型刀夹
Tool holders with cylindrical shank--Part 4:Type C with rectangular axial seat
圆柱柄刀夹第5部分:装一个以上矩形车刀的D型刀夹
Tool holders with cylindrical shank--Part 5:Type D with more than one rectangular seat
乘用车用刮水器刮片长度尺寸系列及连接尺寸
Blade length series and its connection dimensions of wiper for passenger cars
农业车辆牵引车上钩型机械连接装置试验方法和要求
Agricultural vehicles--Mechanical hook-type connections on towing vehicles--Test methods and requirements
乘用车行李舱标准容积的测量方法
Passenger cars--Luggage compartments--Method of measuring reference volume
道路车辆可再利用性和可回收利用性计算方法
Road vehicles--Recyclability and recoverability--Calculation method
电动汽车术语
Terminology of electric vehicles
混合动力电动汽车定型试验规程
Hybrid electric vehicles-Engineering approval evaluation program
混合动力电动汽车安全要求
Hybrid electric vehicles safety specification
混合动力电动汽车动力性能试验方法
Hybrid electric vehicles-Power performance-Test method
轻型混合动力电动汽车能量消耗量试验方法
Test Methods for Energy Consumption of Light-duty Hybrid Electric Vehicles
重型混合动力电动汽车能量消耗量试验方法
Test Methods for Energy Consumption of Heavy-duty Hybrid Electric Vehicles
轻型混合动力电动汽车污染物排放测量方法
Measurement Methods for Emissions from Light-duty Hybrid Electric Vehicles
电动汽车用仪表
Instrumentation for electric vehicles
轨道车辆空调机组
Air-conditioning units for railbound vehicles
机械振动列车通过时引起铁路隧道内部振动的测量
Mechanical vibration-Measurement of vibration generated internally in railway tunnels by the passage of trains
液化气体运输车
Liquefied gas tanker
汽车发动机电子控制系统修理技术要求
Technical requirements for electronic control system of motor-vehicles engine being overhauled
道路车辆 安全气囊部件 第1部分:术语
Road vehicle Airbag components Part 1:Vocabulary
道路车辆 安全气囊部件 第2部分:安全气囊模块试验
Road vehicle Airbag components Part2:Testing of airbag modules
道路车辆 安全气囊部件 第3部分:气体发生器总成试验
Road vehicle Airbag components Part3:Testing of inflator assemblies
双层客车结构安全要求
The safety constructional requirements for double deck large passenger vehicles
道路车辆-静电放电产生的电骚扰试验方法
Roadvehicles-Test methods for electrical disturbances from electrostatic discharge
自行车通用技术条件
General Technical Requirements for road bicycles
汽车空调用橡胶和塑料软管及软管组合件耐制冷剂134a
Rubber and plastics hoses and hose assemblise for automotive air conditioning -- Refrigerant 134a
道路车辆 牵引座强度试验
Road vehicles - Fifth wheel couplings strength tests
道路车辆 牵引车与半挂车之间机械连接互换性
Road vehicles - Mechanical couplingbetween tractors and semi-trailers - Interchangeability
摩托车和轻便摩托车发动机 最大扭矩和最大净功率测量方法
Measurement methods of maximum torque and maximum net power of engines for motorcycles and mopeds
电动汽车传导充电用插头、插座、车辆耦合器和车辆插孔通用要求
Plugs, socket-outlets, vehicle coupers and vehicle inlets for conductive charging of electric vehicles - General requirements
车载导航电子地图产品规范
Criterion of digital map production for automotive navigation system
车载导航地理数据采集处理技术规程
Specification for collecting and processing in-car navigable geographic data
车刀和刨刀刀杆 截面形状和尺寸
Shanks for turning and planing tools - Shapes and dimensions of the section
农业车辆 被牵引车辆的机械联接装置 挂接环尺寸
Agricultural vehicles - Mechanical connections on towed vehicles - Dimensions for hitch rings
农业机械 农业挂车和被牵引设备 牵引杆千斤顶
Agricultural machinery - Agricultural trailers and trailed equipment - Drawbar jacks
汽车动力转向系统用橡胶软管和软管组合件规范
Rubber hoses and hose assemblies for automobile power-steering systems ―Specification
汽车用热塑性非增强软管和软管第1部分: 非燃油用
Thermoplastic tubing and hoses for automotive use―Part 1： Non-fuel applications
汽车用热塑性非增强软管和软管 第2部分： 石油基燃油用
Thermoplastic tubing and hoses for automotive use―Part 2：Petroleum-based-fuel applications
电力机车接触材料用铜及铜合金线坯
Copper and copper alloys drawing stock for the contacting materials of electric locomotives
汽车用高强度冷连轧钢板及钢带 第1部分：烘烤硬化钢
Continuously cold rolled high strength steel sheet and strip for automobile - Part 1：Bake hardening steel
汽车用高强度冷连轧钢板及钢带 第2部分:双相钢
Continuously cold rolled high strength steel sheet and strip for automobile - Part 2: Dual phase steel
汽车用高强度冷连轧钢板及钢带 第3部分：高强度无间隙原子钢
Continuously cold rolled high strength steel sheet and strip for automobile - Part 3: High strength interstitial free steel
道路车辆 牵引车和挂车之间的电连接器 第1部分：24V标称电压车辆的制动系统和行走系的连接
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 1: Connectors for braking systems and running gears of vehicles with 24V nominal supply voltage
道路车辆 牵引车和挂车之间的电连接器 第2部分：12V标称电压车辆的制动系统和行走系的连接
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 2: Connectors for braking systems and running gears of vehicles with 12V nominal supply voltage
道路车辆 牵引车和挂车之间的电连接器 24V15芯型
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 15-pole connector for vehicles with 24V nominal supply voltage
道路车辆 牵引车和挂车之间的电连接器 12V13芯型
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 13-pole connector for vehicles with 12V nominal supply voltage
自动导引车 通用技术条件
General specifications of automatic guided vehicles
车轮平衡机的检验
Verification of wheel balancing machines
液化天然气汽车专用装置安装要求
Mounting requirements for liquefied natural gas vehicle special equipment
汽车用压缩天然气减压调节器
pressure regulator of CNG vehicles
汽车用高强度热连轧钢板及钢带 第1部分：冷成形用高屈服强度钢
Continuously hot rolled high strength steel sheet and strip for automobile - Part 1: High yield strength steel for cold forming
城市轨道交通接触网检测车通用技术条件
General specification for the contact line measuring car of urban rail transit
乘用车正面偏置碰撞的乘员保护
The protection of the occupants in the event of an off-set frontal collision for passenger car
肢体残疾人驾驶汽车的操纵辅助装置
Assistive devices of car manipulation for persons with physical disabilities
机动车出厂合格证
Certificate of Vehicle
农用挂车 全挂车和半挂车有效载荷、垂直静态载荷和轴载荷的测定
Agricultural trailers - Balanced and semi-mounted trailers - Determination of payload, vertical static load and axle load
农用挂车 单作用套筒伸缩油缸25MPa（250bar）系列Ⅰ型、Ⅱ型和Ⅲ型互换尺寸
Agricultural trailers - Single-acting telescopic tipping cylinders - 25MPa(250bar)series - Types1，2and3 - Interchangeability dimensions
声学 办公室和车间内声屏障控制噪声的指南
Acoustics - Guidelines for noise control in offices and workrooms by means of acoustical screens
机动车测速仪
Motor vehicle speed detector
非公路用旅游观光车通用技术条件
General technical conditions for garden patrol minibus
乘用车用橡塑密封条
Rubber/Plastics weatherstrip for automobile
动态公路车辆自动衡器
Automatic instruments for weighing road vehicles in motion
机动车维修从业人员从业资格条件
汽车空调用制冷剂压缩机
汽车用空调器
铁路应用 机车车辆电气设备 第1部分: 一般使用条件和通用规则
铁路应用 机车车辆电气设备 第2部分: 电工器件 通用规则
铁路应用 机车车辆电气设备 第3部分: 电工器件 直流断路器规则
铁路应用 机车车辆电气设备 第4部分: 电工器件 交流断路器规则
铁路应用 机车车辆电气设备 第5部分: 电工器件 高压熔断器规则
铁路应用 机车车辆 电气隐患防护的规定
三轮汽车 驾驶员操作位置尺寸
三轮汽车燃油箱 安全性能要求和试验方法
低速货车燃油箱 安全性能要求和试验方法
汽车泊车测距警示装置
道路车辆 由传导和耦合引起的电骚扰 第1部分: 定义和一般描述
道路车辆 由传导和耦合引起的电骚扰 第2部分：沿电源线的电瞬态传导
工业车辆在门架前倾的特定条件下堆垛作业 附加稳定性试验
托盘堆垛车和高起升平台堆垛车 稳定性试验
散粮汽车卸车装置
轨道交通 机车车辆 受电弓特性和试验 第1部分: 干线机车车辆受电弓
轨道交通 机车车辆 受电弓特性和试验 第2部分：地铁与轻轨车辆受电弓
轨道交通 机车车辆设备 冲击和振动试验
轿车轮胎湿路面相对抓着性能试验方法
Method for measuring relative wet grip performance of passenger car tyres
车用乙醇汽油调合组分油
汽车轮胎静态接地压力分布试验方法
汽车空调用电动压缩机总成
汽车配件营销企业经营管理规范
声学 用于测量道路车辆发射噪声的试验车道技术规范
金属矿固定车箱式矿车基本参数及尺寸
Solid-bottom wagon for metallic mines--Basic parameters and dimensions
金属矿翻转车箱式矿车基本参数及尺寸
Tilting wagon for metallic mines--Basic parameters and dimensions
金属矿单侧曲轨侧卸式矿车基本参数及尺寸
Single-side tipping and curved rail wagon for metallic mines--Basic parameters and dimensions
金属矿底卸式矿车基本参数及尺寸
Automatic drop bottom wagon for metallic mines--Basic parameters and dimensions
金属矿平板车基本参数及尺寸
Flat deck wagon for metallic mines--Basicparameters and dimensions
金属矿材料车基本参数及尺寸
Material supply wagon for metallic mines--Basic parameters and dimensions
充气轮胎用车轮和轮辋的术语、规格代号和标志
Wheels/rims for pneumatic tyres--Nomenclature，designation and marking
载重汽车轮胎规格、尺寸、气压与负荷
Size designation，dimensions，inflation pressure and load capacity for truck tyres
轿车轮胎规格、尺寸、气压与负荷
Size designation,dimensions,inflation pressure and load capacity for passener car tyres
工业车辆充气轮胎技术要求
Technical specification of pneumatic tyres for industrial vehicles
工业车辆充气轮胎规格、尺寸、气压与负荷
Designation，dimensions，inflation pressure and load capacity of pneumatic tyres for industrial vehicles
摩托车轮胎系列
汽车大梁用热轧钢板和钢带
Hot-rolled steel plates(sheets)and strips for automobile frames
内燃机车通用技术条件
General technical specifications for diesel locomotives
内燃机车制成后投入使用前的试验方法
Test methods for diesel locomotives on completion of construction and before entry into service
内燃机车功率确定方法
Method of defining the nominal power for disel locomotives
电力机车通用技术条件
General technical specification for electric locomotive
电力机车制成后投入使用前的试验方法
Test methods for electric locomotives on completion of construction and before entry into service
电力机车和电动车组额定功率的确定
Definition of the rated output of electric locomotives and motive power units
铁道机车名词术语柴油机零部件名词
Glossary of terms for railway locomotive--Names of component parts for diesel engine
铁路机车名词术语蒸汽机车术语
Glossary of terms for railway locomotive--Terms of steam locomotive
铁路机车名词术语蒸汽机车零部件名称
Glossary of terms for railway locomotive--Terms of component parts for steam locomotive
铁道机车名词术语液力传动系统零部件名词
Glossary of terms for railwaylocomotive--Names of component parts for hydraulic transmission system
铁道机车名词术语内燃机车辅助装置零部件名词
Glossary of terms for railway locomotive--Names of component parts for diesel locomotive auxiliary device
铁道机车名词术语内燃机车车体和转向架零部件名词
Glossary of termsfor railway locomotive--Names of component parts for diesel locomotive body andbogie
铁道机车名词术语空气制动装置零部件名词
Glossary of terms for railwaylocomotive--Names of component parts for air brake equipment
铁道机车名词术语内燃机车术语
Glossary of terms for railway locomotive--Terms of diesel locomotive
铁道机车名词术语柴油机术语
Glossary of terms for railway locomotive--Terms of diesel engine
铁道机车名词术语液力传动术语
Glossary of terms for railway locomotive--Terms of hydraulic transmission
铁道机车和动车组司机室噪声限值及测量方法
Noise limit and measurement inside driver's cabs of railway locomotive and powered car train-sets
汽车轮辋规格系列
Rim contour for motor vehicles
自行车部件分类、名称和主要术语
Classification and names of components of bicycles， and basic technology
自行车装配要求
Assembly requirements of bicycles
自行车链条 技术条件和试验方法
Cycle chains - Characteristics and test methods
汽车和挂车类型的术语和定义
Motor vehicles and trailers--Types--Terms and definitions
道路车辆质量词汇和代码
Road vehicle--Masses--Vocabulary and codes
汽车和挂车的术语及其定义车辆尺寸
Motor vehicles and towed vehicles--Dimensions of vehicles--Terms and definitions
汽车大修竣工出厂技术条件第1部分:载客汽车
Technical requirements for completion and acceptance of vehicle overhaul Part 1:Passenger vehicle
汽车大修竣工出厂技术条件第2部分:载货汽车
Technical requirements for completion and acceptance of vehicle overhaul Part 2:Goods vehicle
商用汽车发动机大修竣工出厂技术条件第1部分:汽油发动机
Technical requirements for completion and acceptance of commercial vehicle engines overhaul Part 1:Gasoline engines
商用汽车发动机大修竣工出厂技术条件第2部分:柴油发动机
Technical requirements for completion and acceptance of commercial vehicle engines overhaul Part 2:Diesel engines
农业拖拉机　试验规程　第6部分：农林车辆制动性能的确定
Agricultural tractors - Test procedures - Part 6: Determination of braking performance
卧式车床精度检验
Acceptance conditions for general purpose parallellathes--Testing of the accuracy
蒸汽机车用煤技术条件
Specifications of coals for steam locomotive
电动汽车操纵件、批示器及信号装置的标志
Electric vehicles-Symbols for control,indicators,and telltales
商用汽车辐板式车轮在轮毂上的安装尺寸
Disc wheels for Trucks Dimensional character istics of attachment on hub
高速钢车刀条第1部分:型式和尺寸
High speed steel tool bits--Part 1:Types and dimensions
高速钢车刀条第2部分:技术条件
High speed steel tool bits--Part 2:Technical requirements
Agricultural trailer
农用挂车试验方法
Test methods for agricultural trailer
载货汽车运行燃料消耗量
Fuel consumption for trucks in operation
载客汽车运行燃料消耗量
Fuel consumption for passenger vehicles in operation
救生艇绞车
Winches for lifeboats
Mooring winches
载重汽车轮胎性能室内试验方法
轿车轮胎耐久性试验方法转鼓法
Endurance test for passenger car tyres--Drum method
轿车轮胎强度试验方法
Test method strength for passenger car tyres
轿车无内胎轮胎脱圈阻力试验方法
Bead unseating resistance test for tubeless passenger car tyres
铁道车辆词汇第1部分:基本词汇
Railway vehicle vocabulary--Part 1:Basic vocabulary
铁道车辆词汇第10部分:客车附属设备
Railway vehicle vocabulary--Part 10:Equipments attached to the passenger car
铁道车辆词汇第11部分:专用货车附属设备
Railway vehicle vocabulary--Part 11:Equipments attached to the special purpose freight car
铁道车辆词汇第2部分:走行装置
Railway vehicle vocabulary--Part 2:Running gear
铁道车辆词汇第3部分:制动装置
Railway vehicle vocabulary--Part 3:Brake equipments
铁道车辆词汇第4部分:车钩缓冲及风挡装置
Railway vehicle vocabulary--Part 4:Coupler，draft gear and vestibule diaphragm
铁道车辆词汇第5部分:车体
Railway vehicle vocabulary--Part 5:Car body
铁道车辆词汇第6部分:门、窗及其开闭装置
Railway vehicle vocabulary--Part 6:Doors、windows and their operating devices
铁道车辆词汇第7部分:采暖、通风及空气调节装置
Railway vehicle vocabulary--Part 7:Heating，ventilation and air conditioning equipment
铁道车辆词汇第8部分:给水、排水装置
Railway vehicle vocabulary--Part8:Water supply and draining equipment
铁道车辆词汇第9部分:电气装置
Railway vehicle vocabulary--Part 9:Electric equipment
摩托车和轻便摩托车耐久性试验方法
Test method of durability for motorcycles and mopeds
道路车辆 半挂车牵引座50号牵引销的基本尺寸和安装、互换性尺寸
Road vehicles - 50 semi-trailer fifth wheel coupling pin - Basic and mounting/interchangeability dimensions
道路车辆 半挂车牵引座90号牵引销的基本尺寸和安装、互换性尺寸
Road vehicles - 90 semi-trailer fifth wheel coupling pin - Basic and mounting/interchangeability dimensions
窄轨机车车辆车轮踏面形状及尺寸
Wheel tread and dimensions for narrowgauge locomotives and vehicles
汽车车身术语
Terms for motor vehicle body
道路车辆50毫米牵引杆挂环的互换性
Commercial road vehicles - 50mm drawbar eye - Interchangeability
道路车辆操纵件、指示器及信号装置词汇
Road vehicles--Controls，indicators and tell-tales--Vocabulary
电工电子产品应用环境条件 第5部分：地面车辆使用
Environmental conditions existing in the application of electric and electronic products - Section 5: Ground vehicle installations
汽车平顺性随机输入行驶试验方法
Method of random input running test--Automotive ride comfort
汽车平顺性名词术语和定义
Terms and definitions--Automotive ride comfort
道路车辆 牵引车与挂车之间电连接器 7芯24V标准型(24N)
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage
道路车辆 牵引车与挂车之间电连接器 7芯12V标准型（12N）
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage
道路车辆 牵引车与挂车之间电连接器 定义、试验方法和要求
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Definitions,tests and requirements
道路车辆 多芯电缆线 第3部分：无屏蔽护套低压电缆线的结构、尺寸和标记
Road vehicles - Multicore connecting cables -Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables
声学铁路机车车辆辐射噪声测量
Acoustics--Measurement of noise emittedby railbound vehicles
汽车安全玻璃试验方法第1部分:力学性能试验
Road vehicles--Safety glazing materials--Part 1:Test methods for mechanical properties
汽车安全玻璃试验方法第2部分:光学性能试验
Road vehicles--Safety glazing materials--Part 2:Test methods for optical properties
汽车安全玻璃试验方法第3部分:耐辐照高温潮湿燃烧和耐模拟气候试验
Road vehicles--Safety glazing materials--Part 3:Test methods for resistance to radiation，high temperature，humidity，fire and simulated weathering
汽车安全玻璃太阳能透射比测定方法
Road vehicles--Safety glazing materials--Method for the determination of solar transmittance
叉车挂钩型货叉术语
Fork lift-trucks-Hook-on type fork arms-Vocabulary
平衡重式叉车稳定性试验
Counterbalanced fork-lift trucks-Stability test
前移式和插腿式叉车稳定性试验
Reach and straddle fork-lift trucks-Stability tests
工业车辆 护顶架 技术要求和试验方法
汽车排放术语和定义
Automotive emission--Terms and definitions
叉车 货叉 技术要求和试验方法
叉车 货叉 尺寸
Fork lift trucks-Fork arms-Dimensions
叉车挂钩型货叉和货叉架安装尺寸
Fork-lift trucks--Hook-on type fork arms and fork arm carriages--Mounting dimensions
乘用车车轮性能要求和试验方法
Performance requirments and test methods of passenger car wheels
汽车制动装置液压试验的连接器
Automobile hydraulic pressure test connection for braking equipment
大客车车身修理技术条件
Repair specification for large passenger vehicle body
汽车电器、灯具和仪表名词术语
Nomenclature and terminology for automotive electrical equipment， lighting and instrumentation
可转位车刀及刀夹 第1部分：型号表示规则
Turning tool holders and cartridges for indexable inserts - Part 1: Designation
可转位车刀及刀夹 第2部分：可转位车刀型式尺寸和技术条件
Turning tool holders and cartridges for indexable inserts - Part 2: Dimensions and technical specifications of turning tool holders for indexable inserts
摩托车和轻便摩托车术语车辆类型
Term for motorcycles and mopeds--Types of vehicles
摩托车和轻便摩托车术语车辆性能
Term for motorcycles and mopeds--Performance of vehicles
摩托车和轻便摩托车术语两轮车尺寸
Term for motorcycles and mopeds--Dimensions of vehicle with two wheels
摩托车和轻便摩托车两轮车零部件名称
Motorcycles and mopeds part and component designations for vehicle with two wheels
摩托车和轻便摩托车术语两轮车质量
Term for motorcycles and mopeds--Mass of vehicle with two wheels
摩托车和轻便摩托车术语三轮车质量
Term for motorcycles and mopeds--Mass of vehicle with three wheels
摩托车和轻便摩托车术语三轮车尺寸
Term for motorcycles and mopeds--Dimensions of vehicle with three wheels
摩托车和轻便摩托车发动机台架试验方法
Method of bed test of gasoline engine for motorcycles and mopeds
摩托车和轻便摩托车尺寸和质量参数的测定方法
Measuring method of dimensions and masses parameter for motorcycles and mopeds
摩托车和轻便摩托车可靠性试验方法
Test method of reliability for motorcycles and mopeds
摩托车和轻便摩托车型号编制方法
Code of designation for motorcycles and mopeds
摩托车和轻便摩托车车速里程表指示值校核方法
Calibration method of indication for odometer of motorcycles and mopeds
摩托车和轻便摩托车道路试验总则
General rules of running test for motorcycles and mopeds
摩托车和轻便摩托车起动性能试验方法
Method of starting performance testfor motorcycles and mopeds
摩托车和轻便摩托车制动性能试验方法制动力
Test method of brake performance for motorcycles and mopeds--Braking force
摩托车和轻便摩托车最低稳定车速试验方法
Method of minimum steady speed test for motorcycles and mopeds
摩托车和轻便摩托车最高车速试验方法
Measurement method for the maximum speed of motorcycles and mopeds
摩托车和轻便摩托车加速性能试验方法
Method of acceleration test for motorcycles and mopeds
摩托车和轻便摩托车滑行试验方法
Method of coasting test for motorcyclesand mopeds
摩托车和轻便摩托车爬坡能力试验方法
Method of climbing ability test formotorcycles and mopeds
铁道车辆动力学性能评定和试验鉴定规范
Railway vehicles--Specification for evaluation the dynamic performance and accreditation test
铁道货车通用技术条件
General technical specification for railway freight car
铁道货车检查与试验规则
Rules for inspecting and testing of failway freight car after completion of construction
道路车辆汽车和挂车制动名词术语及其定义
Road vehicles--Braking of automotive vehicles and their trailers--Vocabulary
汽车维修术语
Motor vehicle maintenance and repair terms
汽车通用锂基润滑脂
General purpose lithium base grease for automobile
汽车用离合器面片
Clutch facings for automobiles
铁路内燃机车柴油机油石油醚不溶物测定方法
Test method of petroleum ether insolubles in lubricating oil for railway locomotive diesel engine
城市公共交通标志公共汽车、无轨电车、有轨电车站牌
Marks for urbanpublic transport--Stop board of bus and trollybus and tramcar
城市公共交通标志公共汽车、无轨电车、有轨电车路牌
Marks for urbanpublic transport--Line number plate of bus， trolley bus and tram
城市公共交通标志公共汽车标志
Marks for urban public transport--Mark for bus
城市公共交通标志无轨电车标志
Marks for urban public transport--Mark for trolleybus
城市公共交通标志缆车(索道)标志
Marks for urban public transport--Mark for cable car
城市公共交通标志城市出租汽车标志
Marks for urban public transport--Identification mark for taxi
汽车平顺性脉冲输入行驶试验方法
Method of pulse input running test--Automobile ridecomfort
载货汽车车轮性能要求和试验方法
Performance requirements and test methods of truck wheels
轿车质量分布
Passenger car--Mass distribution
汽车和挂车气压制动系部件上接口的识别标记
Motor vehicles and towed vehicles--Air braking systems--Identification of connections on units
汽车和挂车气压制动装置压力测试连接器
Motor vehicles and towed vehicles--Pressure test connection for compressed-air pneumatic braking equipment
汽车柴油机燃油滤清器的试验方法
Test methods of fuel filters for automotive compression ignition engines
表面粗糙度比较样块磨、车、镗、铣、插及刨加工表面
Roughness comparison specimens - Ground, turned, bored, milled, shaped and planed
汽车起重机和轮胎起重机试验规范一般要求
Test code for truck crane and mobile crane--General requirements
汽车起重机和轮胎起重机试验规范合格试验
Test code for truck crane and mobile crane--Conformity test
汽车起重机和轮胎起重机试验规范结构试验
Test code for truck crane and mobile crane--Structure test
机动工业车辆 术语
Powered industrial trucks-Terminology
农林拖拉机和机械车轮在轮毂上安装尺寸
Tractors and machinery for agriculture and forestry--Wheel-to-hub fixing dimensions
消防车通用底盘