Free Playstation Eboots For PSP Console
Here is a pops compatibility list please add to it by leaving a comment if you can help with the list.
PSX to PSP GLOSSARY
Pops = The in-built PSX emulator for the PSP, developed by Sony. Each firmware has it’s own, though some share the same binary.
Popsloader = A plugin use to load different versions of pops.
Keys.bin = When you download a PSOne Classic form the PSN store, it comes with keys.bin and it’s required for the game to run. The old popstations generate one, but this is not required anymore with the newer popstations.
Document.dat = The game manual, which also comes PSOne Classics from the playstation store. You can make your own custom game manual with PSP DocMaker GUI.
GAME ID = The identification number used by Sony. Typically this is on the Playstation CD in a file named with the region code plus the unique number for each disk. For example, SLUS-00972 tells you it was shipped to the United States.
PSOne Classic = Also referred to as “PSN versions”, these PSX games available for purchase via the Playstation NetworkStore. These versions don’t require Popsloader, most work fine as long as you’re on the latest firmware.
Manual (Y/N)
007 Racing
SLUS-01300
007 Tommorow never
SLUS-00975
SCUS-94231
popsloader @
3.71:boots and plays fine – by killergp123
SLUS-00874
Works fine on 3.71
and 3.90 Pops tested by Raymondgt08
Manual (Y/N)
SLUS-00003
3.90 by 2PS.
SLPS-01280
Works perfectly on 3.90m33-3 tested by Raymondgt08
Ace Combat 2
SLUS-00404
5.00 M33-6: The NTSC-U version of the game doesn’t work. There’s a black screen once you run it. The PlayStation logo doesn’t show up and you are not allowed to choose a Pops. I’ve tried it with two US versions. I’ll soon verify whether the PAL version works or not and post an update.
Ace Combat 3: Electrosphere
SLUS-00972
JEETY: Use 4.01 pops. Played using pspm33-6.
Aces of the air
SLUS-01470
3.80 by 2PS.
Action Man: Operation Extreme
SLES-01761
5.50GEN-D2 works fine with latest POPS
Addie no Okurimono
SCPS-10126
4.01 by 2PS.
Adventure of Little Ralph, The
SLPS-01853
3.90 by 2PS.
Adventures of Lomax, The
SCUS-94906
3.90: Music issues if the image is not good – try PAL version. By 2PS
Agent Armstrong
SLPS-01073
SLPS-00559
3.80 by 2PS – Sound issues
Air Combat
SLUS-00001
5.00m33-6 game works perfectly sheriff.
Air Hockey
SLUS-01467
5.00 M33-4 – works fine.
Akuji The Heartless
SLUS-00715
Akumajō Dracula X: Gekka no Yasōkyoku
SLPM-86023
Get the English translation patch here (this patch is a recent ‘retranslation’ of Castlevania: Symphony of the Night), on 4.01 it works great but 5.00 crashes at the beginning when Richter gets to Dracula Vlad Tepes, tested with patched version on my 5.00m33-6 slim, EBOOT made with Simple Popstation GUI 3.00 – DebugJunky
Alfred Chicken
SCES-03817
Working great on 3.90 with Zoom Mode, some sound glitches in menu
Alien Trilogy
SLES-00101
Graphical Glitches
Alien Trilogy
SLUS-00007
3.90 – Plays fine. -cephirobr
Alone in the Dark – One Eyed Jack’s Revenge
SLUS-00239
Tested by MAN-biker
Hey MAN-biker, please share your results… Tested on 5.00, gameplay seems real choppy… -DebugJunky
Alone in the Dark: The New Nightmare
SLUS-01201
Works perfectly fine. Tested on 3.90 M33 -Cheska
3.80: Crashed after character is chosen at a blank screen if left too long. Solution: After chosen character, the screen will go black, immediately press the X button and the game will run normally. By 2PS
4.01M33-2: (tested on a PSP ‘Fat’) Played the first 15 minutes, everything works fine. By, Caustic Paradox.
5.50 GEN-D3: Seems to work fine if you have your ‘Disc-Load Speed’ set to ‘Normal’. On ‘Fast’, it’ll crash sometime during the first in-game conversation. – TabsMH
Alone in the Dark: The New Nightmare
SLES-02805
Works flawlessly on cf 5.00M33-3 by Druids1974
SLUS-00553
On 3.71 works perfect fine by dopi
Works fine on 5.0 M33-3; dumps occasionally and potential to freeze (Tanthalus).
works perfectly using original from flash pops on 5.00 m33-6 as well as gen d-2 and gen d-3 (whitetiger2695)
SLUS-01017
Works perfectly on my 5.00M33-3 by Druids1974
Works fine on 5.00 m33-6 5.50GENd-2 and GENd-3 whitetiger2695
SLES-02347
Works flawlessly on 5.50 GEN-D3 using 3.90 pops by Nekroido
Ape Escape
SCUS-94423
This game Not working on all pops because required Dual Shock controller – marek2fgc
Apocalypse
SLUS-00373
Works perfectly on 3.90 testec by Raymondgt08
Apocalypse
SLES-00460
SLES-03390
Arc the Lad
SLUS-01224
Update from SaintPizzy: Runs perfect on 3.71 and above.
Update from Druids1974: Works flawlessly on 5.00m33-3. By XsilentX: Runs flawlessly on 5.00 M33-4
Arc the Lad 2
SLUS-01252
Update from SaintPizzy: Works under 3.52 firmware. Use thepopsloader plugin to select your PSX on PSP version.
By XsilentX: Works fine in 5.00 M33-6. Update from Druids1974: New update – works flawlessly under 5.00m33-3 firmware.
Arc the Lad 3
SLUS-01253
Update from SaintPizzy: Works under 3.52 firmware. Use thepopsloader plugin to select your PSX on PSP version.
Update from Druids1974: New update – works flawlessly under 5.00m33-3 firmware. Update from XsilentX: Works under 5.00 M33-6. Update from Orin6909: Works until the end of the first disc on 5.00m33-6. Freezes at hovercraft cutscene, dropped down to 3.72, but wouldn’t let me switch discs at the prompt. Tried loading on disc 2 and same problem occured asking me to switch back to disc 1.
SLUS-00164
Works only for CFW under 3.40 OE (Such as 3.10 OE) 5.00m33-6 works fine -D3dGrlsDnyD4yN0
Arkanoid R 2000
SLPM-86262
Armored Core
SLUS-01323
Armored Core (SCEA release)
SCUS-94182
5.00-4 Works fine.
Armored Core Master of Arena
SLUS-01030
Armored Core Project Phantasma
SLUS-00670
3.71 works. ~mechagodzilla
Armorines: Project S.W.A.R.M.
SLUS-01022
Army Men 3D
SLUS-00491
No flaws. 3.71 m33-4 ~Beaniehat~
Army Men: Sarge’s Heroes
Slight sound pops at main menu, nothing major. 5.00 m33-4 ~Larry D.~
Assault Rigs
SCUS-94405
Slight sound pops at main menu and no music ~Savior X~
ATV: Quad Power Racing
No flaws. 5.00 m33-4 ~Larry D.~
Azure Dreams
SLUS-00614
5.00 M33-4, Works Perfectly! -arNieL-
Mine also works perfetly but the screen has a a black border at the top, if anyone ould help I’d appreciate it. EBOOT was made with Simple Popstation GUI v3.00 – DebugJunky
5.00 M33-6 Works fine using 4.01 pops – Azure Fang
Manual (Y/N)
Works perfectly on
5.00 m33-6 so far (not yet finished).
Batman Beyond: The
return of the Joker
SLUS-01207
3.80 – by 2PS.
Batman Forever: The
Arcade Game
SLUS-00387
3.90: Tested by
Battle Arena
Nitoshinden
SLPS-00485
3.80 by 2PS.
Battle Arena
SCUS-94200
Battle Arena
Toshinden 4
SLES-02493
Works perfectly on
3.71m33-3 with Popsloader 3.71 (Tested by Raito)
Battle Tanx: Global
SLUS-0100%
3.80 by 2PS.
SLPM-86126
Beast Wars
Transformers
SLUS-00508
5.00m33-6 seems to
be the best for this game other will produce graphics errors-by Sic-suicide
Butthead (Virtual Aho Shoukougun)
SLPS-01219
3.11 only – by 2PS.
SLES-00334
3.30 only.
SLPS-00222
BioHazard Demo
SLPM-80027
Director’s Cut
SLPS-00998
BioHazard 2
SLPS-01222
BioHazard 2 [Beta
SLPS-00222
SLPS-00222: Freezes when man in gun shop speaks
(funnily enough, straight after he says freeze!). Tested on 3.40-3.52-3.71-3.80
SLPS-01222: Freezes once entered police station, same way it does with
american version if game id isnt changed. Tested on 3.52-3.80 pops.
NOTE: Debug menu when pressing select
works to change location, including police station.
BioHazard 2 Demo
SLPS-00999
Firmware 3.40 OE-A
required, and SLPS-01222 MUST be set as the Game ID.
BioHazard Gun
SLPS-02553
Bishoujo Senshi
Sailor Moon Super S – Shin Shuyaku Soudatsusen
SLPS-00262
Testinsomegames: 5.00 the music will not work. 4.01
works perfectly fine.
Black Dawn
SLUS-00321
Tested on 3.52
M33-4 by GamerbyDesign
SLES-03213
Blast Chamber
SLUS-00219
3.80 by 2PS.
3.71 works perfectly. 3.80 does not load
levels. -soupy
Blaster Master:
Blasting Again
SLUS-01031
3.02: Seems to be working great.
M33-4: Crashes in on-foot
dungeons. Tested by Joseph Collins.
Blazing Dragons
SLUS-00100
Tested on 3.71
M33-2 by Dusteater1983. It works perfect!
SCUS-94412
Seems to run
perfectly, with no problems.
***** Buster
SLES-04067
3.80 by 2PS.
SLUS-01496
3.80 by 2PS.
Bloody Bride
SLPS-00526
Crashes at ‘Dec 25’
right after the Christmas Party, too bad, it’s a great RPG/Dating Sim.
Please elaborate which pops you tried, GUI you used to create the EBOOT etc –
Debug Junky
5.00 works fine, intro animation has no
audio though, game plays fine after with no graphical/audio problems at all
(half an hour to an hour of testing with disc speed set to fast), disc image
used had the fanpatched applied, EBOOT was made with Popstation GUI 3.00 –
DebugJunky
Blood Omen: Legacy
SLUS-00027
Savegame function
doe savegames are seen as corrupt when read.
Saving seems to be fixed on 3.71 M33-3. Tested by MonkeyJamboree
Works fine on 5.00 M33-3
Bloody Roar
SCUS-94199
According to
&John&:&Works flawlessly and stretches perfectly in 3.9&
works perfectly on 5.00 M33-3 with 5.01 patches. Hangs for a minute after PS
logo, and when you beat arcade mode, it freezes, but the gameplay is terrific
Also no BG music. Stretch looks like widescreen. By Roxas6662
5.00 works perfectly – DebugJunky
Bloody Roar 2
SCUS-94424
According to
&John&:&Works flawlessly and stretches perfectly in 3.9&.
I 2nd that motion. Flawlessly in 3.71, 3.80, and 4.01 M33. One of my FavS.
Tested by MasterTurkey.
5.00 works perfectly – DebugJunky
Bomberman Fantasy
SLUS-00823
3.80 by 2PS
Bomberman Party
SLUS-01189
3.90 by SleepyMan
Bomberman Wars
SLPS-01347
3.90 by SleepyMan
Bombing Islands,
SLUS-01292
3.90 by 2PS.
Brain Dead 13
SLUS-00083
3.90 by 2PS
Brave Fencer
SLUS-00726
If you use the
default GameID it will freeze after the &Chapter 1& screen. So use
one of the GameID’s below.
you do use one of these gameIDs you’ll sometimes notice a little slowdown or
some stuttering in voices, but at least the game works. 3.52 and below:
Use GameID SLPS-01156, SLPS-01724, or SLPS-01222.
GameID SLPS-01156 and SLPS-01724 will work.
3.90: Only GameID SLPS-01156 will work.
Also the slowdown and stuttering in voices is slightly better. EBOOT
needs to be made with CDDA Popstation 1.24 (don’t forget, you’ll need
keys.bin). Many GUIs make bad eboots…
3.90 Works perfect for me with
SLPS-01156, eboot made with Simple Popstation GUI 3.00 and 01156 ID was
patched onto the eboot after – DebugJunky
4.01: If you use GameID SLPS-01490
then gameplay and voices are MUCH better. However if you try to watch the
opening cinematic after starting a new game it will freeze at a black screen
after it zooms in on the castle. So press Start as soon as you can to skip
5.00: GameID SLPS-01490 and SLPS-01156
doesn’t work, game gets stuck on black screen and doesn’t even show the PS
logo. If you use the default SLUS-00726 GameID the game will boot, but it
will freeze after zooming in on the castle and after the &Chapter
1& screen.
5.00m33-6: Works perfectly (no slowdown,
stutter, or freezes that I have seen so far up through chapter 2), looks, and
sounds the best on 3.03 when using GameID SLPS-01156. -Sincerely, X. UPDATE:Only
seems to work if the EBOOT is created with Popstation GUI 300 BETA.
mine with SLPS-01156 with PSX2PSP 1.3 and it works flawlessly so far
(completed chapter 1) -Vyse
6.39ProB8: Works perfectly (!) so far with 3.40
with SLUS-01156. *Note* Popsloader with PspGo will NOT have sound unless you
are using the headphone jack. [As of 7.30.11] -antidentity
PRO B-9: Converted using
Simple POPstation GUI 3.00 BETA and using 3.40 via POPSLOADER, tried using
PSX2PSP but got the Chapter 1 freeze screen using that. Works perfectly,
except a little bit of slowdown with a lot of action going on. Make sure to
skip the opening cinematic or else it will freeze. -NuHalo
SLUS-01170
Breath of Fire
SLUS-00422
4.01: Working fine so far.
Works perfectly on 5.00 M33-6
4.01 5.50 GEN-D3: Working Flawlessly, but encountered a black screen
when switching overworld map to central Wyndia. Re-converted game using all
compressions, encountered same glitch. Converted game with no compression,
and now no problems.
Breath Of Fire 4/IV
SLUS-01324
3.00 &#: Works, but earlier versions have
poorer sound quality. Noticable frame skipping & slowdown (video only) in
the more detailed 3D environments, like towns. Battles run perfectly,
although later spells may change this (unable to test this myself).
Same as above, but the sound is perfect.
&#: Unplayable! After
the Capcom logo you will get a blank white screen. The opening FMV can be
heard playing, but the white screen remains and the game doesn’t respond to
button input. After the FMV you’ll be stuck on the main menu until you quit.
4.01: Works again, but no noticable
improvements over 3.42 & 3.51. NOTE: Upon first trying this pops
the game started fine, but I had a black screen when I loaded my save file to
the world map. I restarted and tried a new game instead, which worked fine.
Ever since then my save file has worked. The black screen may have been a one-off
glitch. Tested by Milkymoocowmoo using NTSC-U version, 4.01 M33-2
version (working on PC emulators) hangs at the Playstation logo. Using
popsloader plugin, it fully works on 3.30 and 3.40 firmware. Edit:
Retrying with a new EBOOT – made from the same image using the same program
with the same settings – successfully worked. Saving/loading also worked.
People on foru sometimes it works and sometimes not. But
when it works, it keeps on working.~Haisook (NTSC-U version, tested on
4.01 M33-2)
M33-6:Works perfectly. No
problems seen so far with this version (half-way through Chapter 3.)
I can also confirm 5.00 works great – DebugJunky
GEN-B2: runs perfectly.
Game image was made using CloneCD from NTSC EBOOT created with
Icetea. Tested on pops 4.01. -Kuraudo-
Prometheus v4:
Runs wihtout problems. Just some minor lags inside some cities. -Fidelis
Brigandine: The
Legend of Forsena
SLUS-00687
works perfect.
tested with 3.80 & 4.01
Broken Sword: The
Shadow Of Templars
SLUS-00484
3.90: Tested on PAL
version (SCES-00346) – by 2PS.
XsilentX: Works fine in
5.00 M33-6.
andwan0 –
SLUS-00484, freezes in Act 3, Paris hospital, CFW 3.10, 3.40, 3.72. Well
actually, when I tried CFW 3.40 again, it appears that scene just runs very
very slow. I left it running and it does still run.. after like 5-10 minutes.
I just quickly try to get past that screen/stage and into the hospital room
to speak to the guy to carry on with the storyline. I manage to get past that
bit and never needed to return. Also, in Egypt or Ciaro there’s some graphic
background clitches. Again, this doesn’t stop the game from playing. The only
WORST part is trying to pick up the soap in the bathroom. Apparently this is
a pixel hunt… and using the PS directional pad is a pain since it has a
constant sensitivitiy…
Broken Sword II:
The Smoking Mirror
SCES-00798
Bubble Bobble 2
SLUS-00838
5.00 M33-6: Works PERFECT for me without pops.
By Sk8eR_PR
Bugs Bunny: Lost in
SLES-00458
6.20 PRO-B8:Working fine with gameid SLPS-01156
and popsloader set to 3.52 as instructed in this thread
Bugs Bunny: Lost in
SLUS-00838
Tested on POPs 3.01
to 5.00 M33-6, none working.
3.40: Changing ID seems to work, I used SLPS-01222 (others may
work tough) and popsloader. Anyway, there are some serious
game doesn’t run at full speed.
Bugs Bunny &
Taz – Time Busters
SLES-02896
5.00 M33-3 Works fine.
Builder’s *****
SLUS-01086
3.80 by 2PS.
Bushido Blade
SCUS-94180
Playable. ~NXMT
3.71: Playable.
Bushido Blade 2
SLUS-00663
3.52: Playable.
Playable. ~NXMT
3.90: Freezes just
before intro movie. ~NXMT
Bust-A-Move’99
SLUS-00725
3.90 by 2PS.
Bust-A-Move 2: Arcade
SCUS-94243
Works fine on 5.00
Bust-A-Move 3dx
SLES-00991
Works fine on my
5.00 M33-3 by Druids1974 – Just no soundtracks but there are sounds FX
Bust A Move /
SCUS-94263
3.90: Experiencing a little delay when
playing Hamm’s stage.
m33-6:: on 4.01POPS no
problem no delays. by JRM
Bust A Move /
Groove 2 – Dance Tengoku Mix
SLPM-86219
3.90: Tested on US version ‘SLUS-0; –
with Popsloader 3.71.
4.01: A bit laggy. But R2/Dodge can be
remapped to the L button. Yay. =].
M33: Music cuts off
during gameplay
Buster Bros.
Collection
SLUS-00208
3.90 by SleepyMan
Manual (Y/N)
C – The Contra
SLUS-00499
Works on 5.00 m33-3
(may work on others).
C3 – Car
Constructor’s Championship (aka Max Power Racing)
SLES-01363
3.90M33 Runs fine.
Assassin2k
C-12 Final
Resistance
SCUS-94666
Cabela’s Ultimate
Deer Hunt: Open Season
SLUS-01400
3.80 by 2PS.
Capcom Generations
– CD2: Chronicles Of Arthur
SLES-11881
3.80 by 2PS.
Capcom vs SNK Millennium
Fight 2000 Pro
SLUS-01476
3.90 by 2PS.
on 3.71 M33-2
Tested on 4.01
M33-2 by Trasgo7
Capcom vs SNK
Millennium Fight 2000 Pro
SLPM-87053
Captain Commando
SLPS-01567
3.71 pops: runs and
plays well but no music and some enemies have distorted sprites
-theydidntnameme
5.00 m33-6: does not load -theydidntnameme
Captain Tsubasa –
Aratanaru Densetsu Joshou (New Legend)
SLPM-87060
Seems works fine on
5.00 m33-3, and 4.01 popsloader.
Carmageddon [M4]
SLES-01960
Needs POPS 3.10;
didn’t work under POPS 3.71. Sound glitches during gameplay, no BGM. (3.10 by
PerfectCircle)
– appears to be working fine: 5.00 m33-6
5.50 GEN-D3: works perfect with 3.10 popsloader
Castlevania
Chronicles
SLUS-01384
Black screen with
audio after death (in 2nd stage after extended play time)
***UPDATE***
3.40 OE-A: The game freezes right after you choose a game mode on the
main menu.
3.52 M33-4: Same result as the previous version. 3.71 M33-4:
Fixes the bug on the main game menu. Beyond that, the game runs perfectly.
5.00 M33-3: Works great. EDIT: Sound lags all the time. So far,
3.71M33-4 is the best solution.
5.00 works perfectly, tested for about 20
minutes and experienced 0 problems – DebugJunky
Castlevania:
Symphony of the Night
SLUS-00067
5.00 M33-3: Ran perfectly.
5.00 M33-4: Perfect
Cat in the Hat, The
SLUS-01579
5.00 M33-6: Works Perfectly.
SLUS-00807
Tested on Gen-D,
works perfectly fine. Fast-load supported. Use the newest popsloader.
Chaos Break
SLES-03107
3.80 by 2PS.
Chase the Express
SCES-02812
3.71m33-4 Works,
but freezes in the intro movie, if you just skip them then the game should
play fine – khajiit
Chessmaster 3D
SLUS-00052
Chicken Run
SLUS-01304
Works Perfectly on
3.90m33-3 tested by Raymondgt08
Chiisana Kyojin
SLPS-01926
3.52: Works – by
3.80/.90: Hangs at loading bar – by 2PS
Chocobo’s Dungeon 2
SLUS-00814
4.01: Playable.
M33-6: Works. -dtconcus
Chocobo Racing
SLPS-01951
Chocobo Racing
SLUS-00844
Popsloader 3.71, works fine.
SLPS-00242
Chou Aniki –
Kyuukyoku Muteki Ginga Saikyou Otoko
SLPS-00183
4.01 by 2PS
Chrono Cross
SLUS-0100%
This game does not
let you save before changing discs, so you are going to have to either use a patch made by
Psychospacefish,
CWcheat, or create a multidisc EBOOT with popstation_md
(only works on 3.71-4 m33 or higher)
3.40: Use GameID SLPS-01222. It will
appear a little laggy, but it’s less likely to freeze. Update: Use
GameID SCUS-94640, it’s much better.
3.51: Use GameID SCUS-94640.
3.52: The game will freeze when accessing the character status.
3.71: Update by GamerbyDesign: Tested on 3.71 M33 with SLUS-0100%
& SLPS-01222 it does not freeze when accessing character status, however
it does freeze in the first boss battle against Mama Komodo. If you use
GameID SCUS-94640 it wont freeze after Mama Komodo, but going to character
status it will freeze.
3.72: Use popsloader to run 3.72 pops. With GameID SCUS-94640
it wont freeze on character status or the first boss Mama Komodo! It REALLY
matters what converter you use to make the eboot. Read Here for more information on what
converter to use.
3.90: Intro movie does not load on the first disc. Use 3.80 popsloader to run 3.72 pops.
3.90: tested on my 3.90 psp
and worked perfectly. i am using original the actual game id and i have both
discs in one eboot. By LordJovanius
it too. LordJovanius’ info is correct. -Xzbit
4.01: Status screen freezing both with original and 94640. Loading
3.72 instead fixes it.
at the end of the KingMoaman Battle using 3.72pops.Use 3.03 Pops to get past
it.by LancerMoogle
5.00: Using GameID SCUS-94640 it doesn’t freeze on Status
screen and it doesn’t freeze after beating Mama Komodo. 5.00 m33-3 might be
just as good as 3.72 for this game. EBOOT was made with PSX2PSP v1.4.2
5.00m33-3: Use UltraISO 8.6.2.2011 to create the 2disc .ISO then use
RS-GUI PopStationMD v.3.00 to create the single eboot.pbp (with psx2psp 1.4
the game freeze on Mama Komodo) and remember to use GameID: SCUS-94640. Start
now the game, it will stop after PSX
logo: time to press Home and select to change Disc, select disc 2 and start
the game again. This time the game will really start till the screen with New
Game and Continue. Choose the one you need and you will be asked to insert
disc 1. So time to make the second disc change again, so press Home and
select Disc 1 and everything will work flawlessly – by Druids1974
5.00m33-4: Using GameID SCUS-94640 Load with 3.40 pops as a
single disc eboot and as soon as you gain control of your character check for
the Status Menu freeze. If you’ve got no freeze then the game will run
perfectly. Tested with eboot made from POPstation GUI 3.00 Beta By
RagnaBlade47 Update by Reilsel: works perfect even without pops 3.40 eboot
made with POPstation GUI 3.00 Beta By Zinga Burga. Does not freeze after
defeating mama comodo and going into status screen.
5.00m33-4: Use popsloader for 3.71 m33. it goes fine on status and
mama komodo. I picked 3.40 pops on the pops menu.
5.00 m33-6: Crashes after PS logo, with or without pops. Workaround:
If using a single disc eboot, change disc to the second cd, and it will run
fine until the New Game/Continue screen. Chose either option and it will ask
for the first cd. Change to the first cd and it should run fine from that
point onwards. -cephirobr
5.00 m33-6: double boot loads fine under 3.72 pops. -greyfox_typezero
5.00 m33-6: Use SCUS 94640 as the game ID / Set popsloader to 3.80
works perfectly (Lorenz Cruz)
5.00 m33-6: 3.72 pops freezes on char. status screen. Use 3.8 pops to
get by. (APTX-4869)
5.50 GEN-D3: 3.80 pops using psx2psp kept original main ID but changed
game id on both discs to SCUS-94640 created a single disc eboot successfully
able to see status screen and no freezes on bosses works perfectly same on
5.00 M33-6 firmware.(whitetiger2695)
5.50 GEN-D3: Run on 3.80 Pops using Game ID: SCUS-94640. I made a
multi-disc eboot with RS-GUI PopStationMD by Red Squirrel. No Mamma Komodo
freeze, and no character status screen freeze. Runs almost completely
perfect. Only lags a bit when going into to battles. – Roxas6662
5.50 GEN-D3: Run on 3.80 Pops using Game ID: SCUS-94640. Worked
Perfectly on PSP
Phat Prometheus Ver 4, POPS 3.80 and Game ID-94640, destroying Time Devourer
know hehe Lynx2303
Chrono Trigger
(Part of Final Fantasy Chronicles)
SLUS-01363
Bad sound, key
items menu not working. (Appears to be fixed in 3.03 OE-A) – Works
fine with 4.01 It runs flawless from start to finish and will never crash
perfect as if it was made for the psp on 4.01m33-tested by Deadlyangel91792
5.00m33-3 Works flawlessly – Game fully played and finished – by
Druids1974
5.00 m33-6 loads flawless w/o pops -greyfox_typezero
5.50 gen-d works flawlessly w/0 pops
Circuit Breakers
SLUS-00697
&# by 2PS.
– works flawlessly on 5.00 m33-6
City Of Lost
SCUS-94150
3.90 by 2PS.
Civilization II
Bad Mr Frosty Played this for hours and hours and
hours using 4.01. No probs.
Worked fine on 5.00 m33-6 – YDNTK9.
Civilization II
Don’t work on
5.00m33-3 – by Druids1974
Clock Tower
SLUS-00539
3.90 by 2PS
5.00 M33-6 Worked almost flawlessly, played game 100% all ending work. You
may occasionally slow down in places with very high 2-d textures such as
elevators, but other than that 100% playable. Deyadissa
Clock Tower: The
First Fear
SLPS-00917
PopsLoader 3.71 By NightmareTX. Have Some Not-So-Frequent Sound Issues. Tiny Slow-Downs
Due To High 2-D Graphics. Playable At 99.5% Anyway You Get The Idea.
Clock Tower II: The
Struggle Within
SLUS-00695
3.80 by 2PS
3.71: New game caused the PSP
to shut off completely during loading. Upgraded to 3.80 and it worked fine. -Creepy
Colin McRae Rally
SCUS-94474
use 3.40/3.51
you can change aspect ratio to 16:9 in menu (and in pops to FullScreen)
Colin McRae Rally
SLUS-01222
Use the same pops
as Colin Mcrae Rally, or it will freeze when you start the race. Tested on
4.01M33-2 by Rronqe
Colony Wars
SLUS-00543
Colony Wars 2:
SLUS-00722
Playing first
mission just fine on 3.90
Colony Wars 3: Red
SLUS-00866
Loads up to the
main menu but freezes when loading a mission. Tested on 3.52 M33-4 & 3.71
M33 by GamerbyDesign.
Update: Game currently works fine with current SLUS. *No* freezing.
– Graphical glitch in fast load mode, use normal. Otherwise works OK! Updated
from Vildar: 3.80 Pops version. Slow load up on the begining And freezing
after compleation of a mission. 3.40 Pops Version. Again slow load up, but
works fine.
Command and Conquer
SLUS-00379
5.00 works perfectly for me on both
discs, multi-disc EBOOT made with PSX2PSP 1.4.2 – DebugJunky
Command and
Conquer: Red Alert
SLUS-00431
Command and
Conquer: Red Alert Retaliation (Allies Disc)
SLUS-00665
5.00 M33-6, 5.50 GEN-A, 5.50 GEN-B2:
Works perfectly under POPS 3.51. Still playable using other POPS, but you can’t save or load your
progress (game freezes). – LiquidSnakE
Command and
Conquer: Red Alert Retaliation (Soviets Disc)
SLUS-00667
5.00 M33-6, 5.50 GEN-A, 5.50 GEN-B2:
Works perfectly under POPS 3.51. Still playable using other POPS, but you can’t save or load your
progress (game freezes) and there are minor sound glitches. – LiquidSnakE
SCUS-94294
3.80 by 2PS
Contender 2
SLUS-01305
3.80 by 2PS
Contra – Legacy of
SLUS-00288
Works on 5.00 m33-3
(may work on others).
Cool Boarders 1
(A.K.A. Extreme Snowboarding)
SCUS-94356
Tested on 3.71 M33
by GamerbyDesign
Cool Boarders 2
SCUS-94358
Cool Boarders 3
SCUS-94251
Tested on 3.71 M33
by GamerbyDesign
Cool Boarders 4
SCUS-94559
NO Tested on 3.52
M33 by GamerbyDesign
perfect on 5.00M33 made with SimplePOPStationGui3.00
Cool Boarders 5
(A.K.A. 2001)
SCUS-94597
Tested on 3.71 M33
by GamerbyDesign
Courier Crisis
SLUS-00442
5.00-4 good.
Cowboy Bebop
SLPS-01126
Crash Bandicoot
SCUS-94900
Works perfectly
3.03, 3.40, 3.71, 3.80 & 3.90. Tested by SephirothX
5.00 works perfectly for me, tested through first stage – DebugJunky
Crash Bandicoot 2
SCUS-94154
Works perfectly
3.03, 3.40, 3.71, 3.80 & 3.90. Tested by SephirothX
fine on 4.01 also.
from mimic_maverick:
I’ve tried crash bandicoot 2, on psp
slim – cfw 5.00-3 with the 5.00 popstation:
-with pops from flash(5.00) && does not even start
-with pops 4.01 && does not even start
-with pops 3.90 && does not even start
-with pops 3.80 && does not even start
-with pops 3.71 && works
-with pops 3.40 && works
-with pops 3.03 && works
from dacomputernerd:I
just tried Crash Bandicoot 2, on psp
phat – cfw 5.00-3 == The game only loaded on 3.30 popstation for me.
On my 5.00 m33-6 it loads and plays perfectly well using pops from flash (5.00),
half an hour of testing it plays fine! – DebugJunky
Crash Bandicoot 3:
SCUS-94244
Works perfectly
3.03, 3.40, 3.71, 3.80 & 3.90. Tested by SephirothX
using 5.50 GEN-D3 firmware with Pops4.01 and it has worked flawlessly so far
(played the first level). Tested by Organized Chaos.
5.00m33-3: Works perfectly so far.
5.00 works perfectly for me, tested through first stage – DebugJunky
5.50 MHU: Work perfect also work when I remove the Spyro the Dragon
(I just delete Dragon folder using Ultra ISO got the size down to ~107mb
compress)-Shazam
Crash Bash
SCUS-94570
Works 3.03, 3.40,
3.71, 3.80 & 3.90. Slight occasional slowdowns. Tested by SephirothX
Crash Team Racing
SCUS-94426
Stuttering mouth
animations during
has no affect on gameplay.
severe glitches and not playable on 3.90 M33 – tested by +DONO
Works 100% fine(including mouth animation) on 3.90m33-3 with exception of
Dracula save icon glitch. – tested by murderinthethirst
To the above poster, the Alucard save icon glitch is a result of using
icon0.png images bigger than 80×80 pixels on a pops higher than 3.71 as past
3.71 sony decided on all PS1 games on PSP having 80×80 as standard, so use 80×80 icons (check
) and you should have no savedata image change. Also, this game
works perfectly for me on 500 – DebugJunky
3.90pops-no problems from what I can
tell.-chickut123
to work fine on 5.50 Prometheus with no popsloader, will continue to
playtest and update – tested by jackbarnard.
Crash Team Racing
SCES-02105
Attempted rip from
original ‘Platinum’ PSX
disc (SCES-02105), froze on loading a race for all pops. Menus worked fine
and hub world, but at faster than usual speeds (varied depending on version).
Downloaded a patched copy which has a built in PAL/NTSC switcher on the
original ISO. Works perfectly on 5.00 M33-6 (except usual PAL borders).
StormPooper
Critical Blow
SLPS-0100%
3.80 by 2PS
Croc: Legend of
SLUS-00530
Works fine, but
occassional graphical gliches, and slowdown. Tested on 3.02 POPS. This is
solved completely on 3.40 POP’s. Tested by SephirothX
5.00 m33-6: freezes after the introduction screen (before the intro),
works great with POPS 3.30/3.40 – finished the game (100%) without even a
single crash. – CrS_pl
m33 3.0 POP’s Works great. A minor slowdown in cutscenes.
to load with 3.30 and 3.40 on 5.03 GEN-C. Appears to be working perfectly on
3.71, no slowdown apparent, tested by Starving Hobo.
SLUS-00634
Works well.
Slowdowns Tested on 3.03. By SephirothX
5.00 m33-6: freezes on the cutscenes before the boss fights (the game
WILL be saved though) – again use POPS 3.30/3.40 to make it work. – CrS_pl
Crossroad Crisis
SLUS-01342
3.80 by 2PS
Crusaders of Might
SLUS-00799
Cyberbots:
Fullmetal Madness
SLPS-01011
5.00m33-6 works
perfectly, finished several times – UltrasevenX
SLUS-00008
Manual (Y/N)
SLUS-00128
3.90: Doesn’t boot
– by 2PS..
Created Eboot using PSX2PSP v1.4.2. Used the game ID SLUS00128 and played
through on CFW 5.00 M33-6 using POP’s 3.72 and switched all
three discs without any problems whatsoever – by Logeyboy.
Dance Dance
Revolution 5th Mix
SLPM-86897
Dance Dance
Revolution Disney Mix
SLUS-01281
Dance Dance
Revolution Konamix
SLUS-01446
Dancing Stage –
Update from Mr.
Mallon: works fine (double
arrows are difficult)
Dancing Stage –
Featuring Dreams Come True
SLPM-86505
Graphical glitches
Dancing Stage:Party
Update from Mr.
Mallon: working up to
trying to get to level 2 then fails
Danger Girl
SLUS-00881
3.80 by 2PS
Darkstalkers 3
SLES-01719
5.00M33-3: Runs
perfectly. Tested by Tickolas.
Darkstone-Evil
3.90 no problems by
LordJovanius
Dark Hunter: ****a
Youma No Mori
SLPS-00789
3.80 by 2PS
Dave Mirra Bmx
Maximum Remix
works great on 5.50
GEN-D3 using 4.01pops, no freezes or lag, Enjoy By h34dc4s3
Davis Cup Tennis,
SLES-00096
3.80 by 2PS
Dead or Alive
SLUS-00606
Runs smooth, no
Deathtrap Dungeon
SLUS-00566
4.01: No issues
Death Wing
SLPS-00489
3.80 by 2PS
Deception III –
Dark Delusion
SLUS-01067
Does not get passed
PSX boot screen.
Test on 3.71 M33 by GamerbyDesign.
Will not work with 3.71-M33-4. Runs fine with pops 3.72; completed through
first mission.
Deep Freeze
(SuperLite 1500 series)
SLPM-86497
3.80 by 2PS.
Demolition Racer
SLUS-00969
4.01: Works fine
Destruction Derby
SCUS-94302
5.00 M33-6: Works PERFECT for me without pops.
By Sk8eR_PR
Destruction Derby 2
SCUS-94350
Works on 3.01 or
Destruction Derby 3
(A.K.A. RAW)
SCES-02060
Major lag issues.
Sound skips. Tested on 3.71 M33 by GamerbyDesign.
Devil Dice
SLUS-00672
5.00 m33-6: appears
to work fine -theydidntnameme
Dezaemon Plus
SLPS-00335
4.01 by 2PS
SLUS-00619
Sometimes freezes
on 3.52. Use 3.40 for perfect gameplay.
after Blizzard logo during intro if disc-load speed is set to fast. Runs fine
on 3.72 with disc speed on normal. Town portals don’t work i’ve found.
5.00m33-6 works fine runs great
5.00 M33-6 Runs perfect no freezes only slow
loads. Roxas6662
Die Hard Trilogy
SLUS-00119
works on 3.71 m33
custom firmware
Works on 5.03GEN-A(Full) With no music
Die Hard Trilogy 2
SLUS-01015
Digimon – Digital
Card Battle
SLUS-01328
3.90 by SleepyMan
Digimon Rumble
SLUS-01404
3.90 by SleepyMan
Digimon World
SLUS-01032
3.52 pops Works
with cfw 5.50gen d3 original from flash
Digimon World 2
SLUS-01193
Digimon World 2003
SLES-03936
Created eboot using IceTea and changed the PAL Game I.D. to SLPS01724. I’m
almost 6 hours into the game and so far no freezes or crashes. I’m running
the game on CFW 5.00 M33-6 using POP’s 3.52 the game has some
slight lag for me but that’s it. Another user that has tried this method says
that the game plays faster on their POP’s 3.52 but again no freezes or
crashes – by Logeyboy.
functional ID is SLPS01222. Tested on 5.50 GEN-D2 by Largeroliker. On 6.35
Custom Beta fix2 the game runs well with original ID, but it freezes when you
go away. Open the map and close it to fix the bug. Fake japeneses ID won’t
work anymore. Test by largeroliker.
M33-6 I used Game ID
SLPS01724. I’ve used 3.71 pops and not a single freeze after 25 hours. Will
update when I finish the game. – L3onardo07
Digimon World 3
SLUS-01328
3.71: Make sure you use GameID SLPS01724
M33-6: Use GameID
SLPS01724 and 3.71 pops.
NOT COMPRESS .IMG FILE. JUST CONVERT IT
will be some minor slowdowns during load fades, but otherwise works perfectly
fine – Azure Fang
Inside the circuit boards, there are chances that the game will hang when you
proceed to the next segment of the board. So in order to fix this, move
around and engage in a digimon battle before proceeding. Also, SAVE
FREQUENTLY – Y2Jacky
Dino Crisis
SLUS-00922
Voices do not work
under 3.52 M33.
Update by GamerbyDesign: Everything works perfectly, including the
voices. Tested on 3.71 M33.
Update 2 by GamerbyDesign: On the PSP Slim when you switch to the shotgun and
try to shoot the game freezes and the PSP shuts down. Tested on 3.71 M33-2.
Update by JarvyBirdman: On the PSP Slim 4.01 Pops fixes the freezing problem with the
shotgun tested on American version Everything is working perfectly so far,
including voices.
by Mavincenzi:
(PSP-Slim 5.00
M33-6) To avoid the shotgun freezing bug, just change your eboot GAMEID to
SLPS-02180 (Japanese Version), you will lose your gamesave, but the game
works perfectly.
Dino Crisis
SLPS-02180
Update by Slippy: Shotgun freezing is fixed on the PSP Slim using 4.01 M33-2.
Japanese version of game was used. Everything runs perfectly so far,
including voices.
Dino Crisis
SLES-02207
5.03 GEN-C Works on 4.01 POPS – Syth
Dino Crisis 2
SLUS-01279
Played the first 30
mins using a PSP
FAT with 4.01 M33. No problems with weapons or items. MenuS fine. Sound and
graphics are good. Added WORKING game manual link.Tested by MasterTurkey
5.00 m33-6: The game runs great overall. The only issues I had were
with the last 3-4 FMVs where the PSP
would freeze and shut off. You can circumvent this by pressing SELECT to skip
the movie.Tested by FunkDAT25Z
SCUS-94600
Game runs, but
graphics are messed up (in pops 3.40). Graphics are perfect in 5.00.
SCES-00012
runs fine on 3.90 –
Discworld II
SLES-00793
3.90 by 2PS.
Discworld Noir
3.52 only – by 2PS.
Disney’s Donald
Duck – Goin’ Quackers
SLUS-01242
Works on POPSLOADER
for 3.80M33 v2 + set game ID=SLPS02180. When popsloader loading menu appears,
select 3.00, 3.01, 3.02, 3.03 or 3.10 pops ONLY, game does NOT work on pops
versions above (hangs up after 2 intro movies)!!! Tested by MAN-biker on PSP Slim FW v3.80 M33-5
Disney’s Hercules
SCES-00891
Disney’s Tarzan
SCES-01516
3.11 only – by 2PS.
Disney World Quest
– Magical Racing Tour
SLUS-01106
Game works fine.
Tested on 3.90-5.00 M33-6. Also works on 5.50GEN-D2 using POPS from flash.
Converted with POPStation GUI
SLUS-00224
3.80 by 2PS
DoDonPachi
SLPS-00548
Tested and works on
3.40 POPS, 0 compression tested by BootsMegamix
SLPS-01364
Works on 3.40 POPS
tested by BootsMegamix
SLUS-00077
Freezes at first
loading screen on ANY firmware (3.00-3.73).
update* 3.80 pops works! same as
PAL, no speed issue. ~Beaniehat~
Runs flawlessly on
5.00 M33-6, except for the fact that the music in the main menu and
intermissio it’s there on 4.01 and this version seems to
work just as fine so far
SLUS-00132
Intro is messed up,
but works! Gameplay is a little fast, such as faster reloading.*graphics are
unviewable 3.00-3.03**3.80 fixes speed issue, intro still broken. ~Beaniehat~
Double Dragon
SLPS-00191
3.90 by 2PS.
SLPS-01934
Dracula: The
Resurrection
SLUS-01440
Dracula 2: The Last
SLUS-01440
3.80 by 2PS.
Dragon Ball GT
Final Bout
SLUS-00493
Perfect with 3.51
and 3.71 POPS
Dragon Ball Z
SLPS-00355
3.52: Sometimes freezes. Use 3.40 for
perfect gameplay.
3.72: Doesn’t seem to freeze like it did
Dragon Quest IV
SLPM-86916
Mr. Creehan
reports: Seems to work pretty good in Pops 4.01 and 5.00 M33-6
3.72: Doesn’t seem to freeze like it did
Dragon Valor
SLUS-01092
3.00-3.03: Strangely the Purple Plant does not
drop Fire Magic, instead it drops a random item. If you want to unlock all
the magic you’ll probably have to use CWcheat codes.
3.10-3.72: For some reason the Purple Plant
drops an invisible item. If you attempt to collect it the game will freeze.
You cannot continue without collecting it, so use popsloader and run the game on 3.03.
4.01: Same problem, freezes after trying
to collect the invisible item from the Purple Plant.
m33-6 PSP slim – POPS 3.00 &#
did not work for me, but there is another way:
CW cheat, you can import a .mcr save to load from the game, put the .mcr in
the seplugins/cwcheat/mcr folder, then run the cwcheat in game by holding
select, choose manage memory cards, and load memory card 1 from memory stick
with the slus of the game once that is done press O twice to exit the cwcheat
and then load the game from the title screen.
1 – Tutorial Level crash Workaround
still contains the &random item& crashes, but fortunately the items
that get corrupted are more likely to be VAL coins, the tomes pickup fine. Be
on the lookout for static/ discolored items, or invisible ones throughout the
game, pickup will cause the game to crash.)
Update 4/28/09*
5 – Demon Fortress crash Workaround -Crash found at Demon Fortress gate (Door
will not open until item is picked up) in this case the item was discolored
and pickup caused the crash. -Crash found in Chapter 5 at the Demon Fortress
(fighting crystal warriors). Fortunately, these segments were minimal and no
crucial part of the storyline is missed.
5.50GEN-B2: Created a multidisk EBOOT on PSX2PSP v1.4.2. Changed Disk
1 and Main Game ID to SLPS02190 and game works on pops 4.01, finished game
twice without any crashing on any level (Purple Plant drops fire tome and
game doesn’t crash). by: Tuga98
5.50GEN-C: *Sigh*, I had high hopes of the
newer firmware solving the issues.. Repeated the above, and it failed.(Purple
Plant drops invisible object and game still crashes). by:robert
Dragon Warrior
SLUS-01206
Locks up at
Deathpal boss
UPDATE: Stopped locking up on Deathpal boss
using 3.10 OE-A and up.
up on 3.80. Use 3.40 via popsloader
4.01:works perfect-?R()§+H@X
5.00: Text windows do not display. —
SargeSmash UPDATE 5.00m33-3: Make multi-disk EBOOT (ImpalerPSX), use
POPS 3.71.
SLUS-00842
Slow down issues.
Update by hugotinini: Works fine on 5.00 M33-6, using 3.90 pops. Able
to restart missions.
by GamerbyDesign:
Tested on 3.52 M33-4 game works perfectly except that you can’t restart
missions because it freezes. From TheFilipinoChannel: The restart
problem is gone when played from ‘original from flash’ in 5.00 M33-4.
Although the slow down issue still remains. Played on PSP fat in version 5.00
M33-4. Dec/17/2008.
‘Try again’ crashes
on my 5.00 M33-6 from flash and older pops. No slowdown though. 3.51 and
below have sound issues too. StormPooper
SLUS-01161
PSP can?t switch to
CD2. Use this patch in CD2 to play full game. Patch
& Testing by largeroliker
link above is dead, ive reuploaded the file
– OPALAO Link fixed – Largeroliker
SLES-02997
PSP can?t switch to
CD2. Use this patch in CD2 to play full game. Patch
& Testing by largeroliker
can use this GameShark instead patching: _S SLES_12997 _G Driver 2 CD2 ESP
_C1 CD2 bypass fix _L
0000002E _L
GameShark trick by largeroliker
SLES-02994
Use 4.01 pops for this game , CD1 is playable but
CD2 can’t boot & Swap Disc doesn’t work on PSP (with Simple or Multidisc
this Fix for by-pass this problem :
– Fix Disc 2 & (Fix NoSwap for CD2) enable the game menu on disc 2
– Fix Disc 1 & (Use for Multidisc eboot only) add besides the &fix
disc 2& for create a Multidisc EBOOT with Auto-Swap Disc
Fix for Driver 2 PAL-FR by
Lyan53 :&& Link &&
– && Mirror &&
With this Fix , the game is 100% playable
Enjoy … ~ ¤
Tested by Lyan53 ¤ ~
Duke Nukem – Land
of the Babes
SLUS-01002
Game not working
(3.52 M33-4)- Tested by J30H30
Works perfectly (3.03)- Tested by J30H30 3.71 and 4.01 pops:3.71 seems
to run the cutscenes a bit better 4.01 runs flawless except for some
cutscenes- frosth@x
Duke Nukem – Time
SLES-01515
Duke Nukem – Time
SLUS-00583
Works perfectly on
5.00 M33-3 with 5.01 patches. Tested by Roxas6662.
Duke Nukem – Total
SLUS-00355
5.00 m33-6, 3.90,
3.71: works, but has some slight framerate problems (speeds up on some
occasions), regardless of ingam eboot created with
simple popstation gui 3.00 and tested with compression levels 0 and 9
Manual (Y/N)
Earthworm Jim 2
SLES-00343
5.00M33-3: No
music, otherwise it runs fine. Tested by Tickolas.
4.01: Music works, runs fine.
Echo Night
SLES-00820
3.90 by 2PS.
Eggs Of Steel
SLUS-00751
Screen appears
black on all firmware from 3.00 to 3.90. By 2PS.
SLUS-00809
3.71 and lower: Use popsloader and 3.03 or the game will take
FOREVER to load.
4.01: Runs great, doesn’t take forever to
SCUS-94243
Played through
first two bosses, worked 100%. 3.52, 3.90-3. -Meursault
fine on 5.00 M33-3
6.20 TN-D on
PSP-3000 4g
– Works flawlessly from beginning to end. Used PSX2PSP 1.4.2 to convert.
Emperor’s New
Groove, The
SCUS-94571
Equestrian Showcase
SLUS-01462
Eretzvaju / Evil
SLPS-01790
Eternal Eyes
SLUS-01034
Evil Dead Hail to
SLUS-01072
works flawlessly in
3.71 pops 4.01 M33-2 PHAT
Excalibur 2555 A.D.
SLUS-00541
SLES-00097
3.80 by 2PS
Extreme 500
SLES-02220
3.90: Doesn’t boot
– by 2PS.
3.11: Crashed when attempting to quit in-game – by 2PS.
Manual (Y/N)
Fade to Black
SLUS-00236
Best on 3.72 with
Fast Load Speed
Fatal Fury Wild Ambition
SLUS-01001
Fear Effect
SLUS-00920
Disc swapping not
possible via PSP in all pops as &wrong disc& is always displayed.
To work around this issue use cwcheat to save and then transfer to PC, use
emulator to get to next disc and save at first opportunity. Convert save back
to PSP and continue on next disc (make sure save is correct game code for the
disc). Assassin2k
Fear Effect
SLES-02166
5.00m33-3 – It works flawlessly with ISO made
with UltraISO 8.6.2.2011 and a single multi disc eboot made with PSX2PSP
1.4.2. – by Druids1974
Fear Effect 2: Retro Helix
SLUS-01266
Fear Effect 2:
Retro Helix
SLES-03386
5.00m33-3 – It works flawlessly with ISO made
with UltraISO 8.6.2.2011 and a single multi disc eboot made with PSX2PSP
1.4.2. – by Druids1974
Felony 11-79
SLUS-00533
3.80 by 2PS
Works perfectly. Tested on 3.71-M33-2.
FIFA ’99
SLUS-00782
5.50 GEN-D3
with music. Game freezes after goal or corner kick etc. PSX2PSP 1.4.2. – Lukay
FIFA ’05
SLUS-01585
Tested and working
on 3.03, 3.40, 4.01, and 5.00-M33/Popsloader. No lag or bugs.
Fighters’ Impact
SLPS-00822
3.80 by 2PS
Fighting Force
SLUS-00433
3.80/3.90/4.01/5.00
M33-6: Playable, but some music and sound fx are missing. – LiquidSnakE
Final Doom
SLUS-00331
Runs flawlessly on
5.00 M33-6, except for the fact that the music in the main menu and
intermissio it’s there on 4.01 and this version seems to
work linked manual is down
Final Fantasy IV/4
SLUS-01360
A minor sound
glitch occurs, an example of this is a song stalling while the game continues
playing. This occurs on most versions emulated by 3.80 M33 Popsloader. No
gameplay issues have been seen while using 3.80 M33 to emulate 3.40, but the
sound glitch still occurs at one point, but it does not affect gameplay. [3.51]
Works perfectly so far. The sound glitch from 3.40 has disappeared. I am only
beginning the game, so I don’t know if it has problems in the later stages. –
Final Fantasy V/5
SLUS-00879
Going to the save
game screen sometimes draws garbage. Hitting cancel to back out of all menus
and then going back to it (sometimes it takes a few tries) will eventually
cause it to draw properly. Testinsomegames: 5.00 M33-6, I’m two hours into
it, and I’ve experienced this same problem. From my observations, it occurs
only on the world map, and when the just enter it and try to save. You have
to move at least one square for the graphic error to not occur. Like when you
just leave a town, or just make dock, or just leave a battle, just move a
square or two and you should be able to see your save screen.
Mr. Creehan: The final fantasy V[From Final Fantasy Anthology] bug seems to
be neither caused by the pops nor the conversion form. The same bug is present
in the PS2: [1] .
Final Fantasy VI/6
SLUS-00900
If you use a high
version of pops you will get a corrupted save. To solve this, delete your non
working save, then use popsloader to run the game on 3.03. Once you get
to the title screen you’ll have a perfectly working save. You can now reset
and use popsloader and use a higher version to play the game.
5.00 m33-6:There’s no corrupt save file problem.
Final Fantasy VII/7
SCUS-94163
Make sure your
Disc-Load Speed is set to &Normal&. If you have it on Fast the game
may glitch after a battle.
3.03: Certain enemy moves can cause the
the whole screen to turn green or red while still hearing battle sounds and
music, the game time will literally slow down to where one attack can take
ten minutes to complete. If you do manage to make it to the field screen,
save then reset to restore the glitched graphics. Known moves to cause this
so far: Hell Bubbles, Sleepel, Ultrasound, and Limit Break: Seal Evil
(basically any attack that can cause sleep or silence).
3.11: No battle swirl, but sleep and
silence attacks don’t cause game to glitch.
3.40: Battle swirl works fine, but sleep
and silence attacks DO cause the game to glitch.
glitches in battle after Yuffie steals your materia.
3.52: Battle swirl works fine, also sleep
and silence attacks no longer cause glitches.
3.71: The Music tempo is slightly too
quick but other than that it works great didn’t crash or glitch at all.
-anthall1991
after you beat Demon Gate, you wake up in Gonagaga, Go down to the south of
Gonagaga, BUT there will be no Tiny Bronco there.
game freezes at certain points in Cosmo Canyon. Switch to a different version
of Pops to get past this issue.
in which Yuffie hides in during the Wutai sidequest doesn’t shake. Switch to
a different version of Pops to get past this issue.
game froze when trying to enter the 3rd area of the Ancient forest.
Everything else worked fine.
3.80: Unplayable. The battle swirl causes
the game to glitch. Use the new popsloader to run the game under a version that
3.90: Same problem 3.80 has. Use the popsloader designed for 3.80 m33 and boot up in
3.71 pops.
3.90M33-3: Use the popsloader designed for 3.80 m33 to boot up in
3.71 pops. -anthall1991
4.01: Some attacks sound odd but other
than that it runs flawlessly. -anthall1991 The first Rocket cinema upon
meeting Cid and/or the Gold Saucer date scene may freeze the game.
Other FMVs might freeze as well. I’m getting the freezes consistently,
anthall1991 is not, and we are both running 4.01 M33-2. If you get this
freeze, switch down to 3.71 to get past the cinema. -Tzepish
M33-2: Some scenes cause
pixelation like unreadable text and wrong colors.-blindreaper
5.00: Starting a New Game causes the game
to hang endlessly. -Tzepish
M33-3 Have started a new
game it no longer hangs at the opening FMV and I’m playing through it. No
errors at all so far will update this if I come across anything. -Mick1155
M33-3 Whether your New
Game and FMVs crash/hang seems to depend on which programs were used to create
your EBOOT. For best results, use ImgBurn to extract the disc images (in
BIN/CUE format), and PSX2PSP to convert them to a multidisc EBOOT. -Tzepish
5.00 M33-3 I extracted the CDs using CloneCD and popstation_md version
1.24 to create a multi-disc eboot and it has been running perfectly. I am
currently 3 hours in to Disc 1. I will edit this as I get further in to the
game. -NoahBody
5.00 M33-3 UPDATE After many hours of perfect gameplay, it finally froze in Rocket Town while the FMV was playing. Also
hangs on 4.01 & 3.90. FMV plays fine on 3.71, 3.72 & 3.80. I will remake the eboot
with PSX2PSP as suggested above and see if it will then work. NOTE: I ripped
the images from original black, unscratched discs. -NoahBody
5.00 M33-3 UPDATE 1 I remade the multi-disc eboot with PSX2PSP v1.4.2
and the FMV in Rocket Town played fine! I
also started a new game and played up to the first battle and all was well. I
guess there are different bugs in the the different eboot makers! Will update
again later in the game. -NoahBody
M33-4 Cd extracted using
Latest version of image burn… Multidisk eboot created using PSX2PSP
v1.4.2… Main Game ID using the original… each cd game id i use the
original from the cd(PSX2PSP v1.4.2 automatically load it when u choose
eboot) I Finish the game already&#% playable… No Lockup…
-phantomrenegade-
M33-4 Extracted from a
scratchy NTSC-U disc with latest imgburn, and created a multidisc eboot(3
discs) with PSX2PSP 1.4.2. Seems like the game sometimes get totally messed
up when exiting battle if the disc speed is set on fast. (the whole screen
gets white/red/blue, but you can still play.) Works perfect if set on normal
through. And minor slowdown when exiting battle, but nothing that a average
player would notice. Finished the game without problems. – Pojkflickan
M33-6 works flawlessly,
no lags or freezes. enjoy!- jquad_666
GEN-B 3.80 POPS causes
draw error / locks in battles. 3.90+ POPS cannot run FMV. 3.71/3.72 POPS
works great except for minor sound glitches… Otherwise 3.71/3.72 POPS is
perfect through whole game. -Mikey-
5.00 works 100% perfect on my 5.00 m33-6
slim, I also patched each disc with Gemini’s Spirit Bug Fix (available here)
so that the SPR stat actually does something now and the EBOOT works perfect.
EBOOT made with PSX2PSP 1.4.2 – DebugJunky
GEN-D works fine on disc
1, i’m already at disc 2 and still no freezing,hold or lag. I used original
pops from the 5.50 GEN-D. can someone post how to use the Gemini’s Spirit Bug
Fix – VEnDeTtA_bOy
I’m now at disc 3 and still no error except for 1 when you get the Imperial
Guard item, when i equip it to someone on my team, suddenly a green or
something like when you use the CHICHEN. opening the file on photo like that
happened to me.
Final Fantasy VII/7
SLUS-00700
5.50 GEN-B 3.72 pops seems to work fine. FMV:
check. Battle Swirl: check. Magic: check. Img Burn to Rip, Ice Tea to create
single disk EBOOT. – AeroSigma
Final Fantasy VII/7
(Platinum)
SCES-00867
Works flawlessly on
5.00m33-3 with a multi disc single eboot made with PSX2PSP 1.4.2 – by
Druids1974
Final Fantasy VII/7
SCES-00869
In 3.03OE-C, the
screen is moved to the bottom. Playing in &original& size works,
but stretching it in any way crops the screen at the bottom.
Final Fantasy VIII/8
SLUS-00892
Set camera movement
to 0% in the game’s configuration.
using an alternate GameID (SCUS-94640, SLPS-02180, SLPS-01222, or
SLPS-01156). There’s also this tool to switch between two popular IDs.
that may cause the game to freeze (especially on the default GameID):
Zell’s
Duel Burning Rave
of Quistis’ limits.
and casting magic in battle.
for an extended period of time.
special attacks monsters and bosses can do.
Elvoret in the Comm Tower.
Granaldo in Training Area (3.71 M33-4)
in the Dollet forest can cause the game to randomly freeze.
fighting Griever if he draws from you, the game may freeze.
WARNING!: SMALL SPOILER ***
During the battle on the train, with the captured ‘President’ Deling, Using
SCAN is likely to cause a crash, along with a few other spells and
actions(mixed, just luck I guess). This is using ORIGINAL ID(SLUS-00892).
I managed to get through the battle and to the next save point by just
using IFRIT(Squall), SHIVA(Selphie), and Blizzard(Zell) – There were a few
slight glitchy bits where I thought it was going to freeze, but it worked ok
first try without using SCAN. If you want to just use the original Game ID,
then be weary of certain magic and moves.
[Pops From Flash On CFW 5.00_M33-6] – Anarchy4_20
specific information on making this game more compatible, go to the Final Fantasy VIII
4.01: Default GameID on default settings
works great. It drops a frame or two when entering a battle, but that’s about
4.01: Still problems with Scan
magic ? freezing before or just after scan on 90%. Upd: Works
fine when popsloader is disabled.
you encounter the Lunar Cry Crash when Squall is unable to move after the
previous FMV, you will need to use popsloader 3.71 and then mash buttons at
the end of the FMV in order for the game to hopefully trigger the next scene.
(This will only be necessary if you are using a Multiboot, as Single boot
users can use lower versions on popsloader.) – Aekom
4.01:Working with no problems encountered
using game id SLPS02180, and in single-disc eboot, even popsloader is enabled
in 4.01M33-2 (set in original from flash) – krystabegnalie
3.90 Use PSX2PSP v.1.4.2. Create Eboot
with at least 2 (I did all 4) Discs. Use SLPS_02180 for every Disc. Using
this method I NEVER had any freezing and only (in 40+ hrs of play) 3 – 5
slowdowns. Used ISO Producer 1.1 (from autopopstation 4). 75UR15
4.01M33:For some people it may freeze on the
first disc during the dance when rinoa looks at squall after bumping into
another couple this problem is caused by a bad torrent download if it happens
to you i reccomend downloading it from an alternate location
4.01M33:disc 2 is a bit laggy in battle
useing game id slps02180 disc 1 runs flawlessly except for some fmvs will
update when i get to disc 3 -deadlyangel91792
4.01:Freeze the last battle against
ultimecia (CD4)using game id SLPS02180 – Alucard
5.00-3 Game does not load either disk
m33-3 I used psx2psp to
convert the game. Im already on disk 3. It didnt froze on Diablos fight or
any boss fight so far. Not freezing when using scan. Using default game ID
and original from flash pops – breakfastboi
trying to do the Angelo Search trick but it doesnt seem to work on 5.00
m33-3. But so far, using the orig game ID works for me, im juts finishing the
sidequests before going to disc 4 – breakfastboi
m33-6 FF8 is working
fine except the part where the lunar cry fmv is, Squall will not move. tried
pops 3.80 and it worked fine and went back to 5.00-pipax21
M33 Used CloneCD to
rip and popstation_md version 1.24 with the games own GameID. I’ve been
playing over an hour with no problems at all. Will update as I get further
into the game. – NoahBody
M33-6 Most of the game
works fine. Using certain spells such as Full Life, and Bio, freeze the game.
All FMV’s work. Made EBOOT with Popstation GUI 3.00. Tested by Roxas6662.
GEN-B Followed
instruction found under &Another Note& in FF VIII page. Compiled
multi disc eboot using RS-GUI and used GameID SLPS-02180 to remove the
problems of cast/draw locking. YOU MUST USE 3.80/3.72/3.71 POPS to get though
the FMVs in the game. You can use 3.71/3.72/3.80 through entire game but
there is major slowdown in some battles and when junctioning GFs and Magic
along with sound problems in battles. Use 3.90 POPS to run game at full speed
and just switch to 3.80/3.72/3.71 when you need to get though an FMV. – Mikey
gen-d need 3.71 popsloader to get past opening and used 3.90 afterwards seems
to play flawlessly even with ifrit battle,drawing,casting, limit breaks, fmvs
etc will update when i get further in the game. -shiro
gen-d Multidisk eboot.
Game freeze after Lunar Tear FMV while you’r inside the space station [CD3].
I tryed ALL pops and none of it seems to work. Any ideas? – Xandro
Created multidisc eboot using SLPS-02180 and RS-GUI PopStationMD v3.00. Use
3.90 POPS to play the game, but use 3.71 POPS to get past FMVs that don’t
work on 3.90 POPS. For those who have trouble with
the Lunar Tear FMV, run on 3.71 POPS and set the &Disc-Load Speed&
to FAST. – Tacoguy
Using 3.71 pops on my 5.50 Prometheus PSP with disc speed load
set to normal, my 4 disc eboot worked fine except for Laguna dream 5. Do not
save using cheats and turn off your system at the start of this section, it
will glitch and you will no longer have a way to proceed. -Rurik
Final Fantasy
SLES-02080
PAL versions of
FFVIII are copy- in order to play them, it’s necessary to fix the
images with a PPF patch (use PPF-O-Matic 3.0 to apply the
patch) before converting them into eboots. Game works with more or less the
same flaws afflicting the NTSC version, fixable with the GameID workaround.
(3.71 M33’3 by PerfectCircle)
to patch the PAL version of FFVIII (and FFVII for that matter) search for an
app called PatchIt (DCEmu has some of the files necessary) and Zapper /
Zapper2000 (not sure on this one though it may just fix the screen position
between PAL and NTSC). – Keikura
Final Fantasy IX/9
SLUS-01251
3.71:Minor frame dropping during scenes
with many characters, nothing to affect playability.
Minor sound glitches during some model-based battle scenes on 3.71 M33-3 by
MonkeyJamboree.
3.80 M33-5:Plays perfectly except for minor graphic problems in 2
FMV’s (When queen Brahne summons Bahamut (Disc 2?), and Zidane in the lifa
tree (Disc 4)). Eboots created with Alcohol 120% and popstation GUI V 3 beta
by ZiNgA BuRgA
3.90:Opening FMV played for me, however there was no sound. I copied
the game with Alcohol 52%, then made the eboot with PSX2PSP v1.3.
3.90 m33-3 Slim: The second FMV that plays after Pinnacle Rock (With
Zidane and Dagger running through the field towards Lindblum) is like the
opening FMV, as it has no sound. – G_S
Confirmation: 3.90 M33-3 Plays the intro FMV with no sound
irrespective of programs used to copy/convert to eboot. Additionally the FMV
at the start of the festival can bug out and make a loud buzzing sound. Other
than that works perfect. -Vanit
4.01 M33-2: Opening FMV played from the first disk (and probably
single disk eboots) has no sound, however you can get the sound to play by
switching to one of the later disks and selecting New Game. It’ll ask you to
put in the first disc. After switching disks it’ll start the FMV with all of
the sound. This probably won’t help any for the later FMV, though. -Ganoran
5.00 M33-3 With a multi-disc Eboot when you start a new game, the
screen goes black and locks up. With a single disc Eboot, the opening movie
has no sound but the game plays fine so far.
4.01 With a multi-disc Eboot when you start a new game, the screen
goes black and locks up. With a single disc Eboot, the opening movie has no
sound but the game plays fine so far.
5.00 M33-4 Well, i ripped from my NTSC-U black discs in perfect
condition with latest imageburn, and the game played fine as a single-disc
eboot. Just like the orginal, the intro played fine. With sound. And all
other FMVs too. Worked perfect. Converted with PSX2PSP v1.4.2. //Pojkflickan
4.01 M33-2:used poploader 3.72 and have sound on the intro!–Chaosbladeuk 14 January
M33-4 As a single disc
eboot load in 3.80 pops and game runs perfectly so far. I’m in Gizamaluke’s
Grotto with no problems with the gameplay. There is barely noticeable lag in
music during the entering a battle sequence and putting your PSP into suspend
mode while the game is running and turning it back on freezes your PSP. Eboot
made with POPstation GUI 3.00 Beta By RagnaBlade47
5.00 M33-4:Using single disc eboots in the default Popsloader (from flash
so 5.00), it’s very much playable. The opening sequence had no sound but
everything else was fine. There are some minor sound and lag issues during
opening/closing menus but its barely noticeable. Also, the scene when
Alexandria is attacked by Bahamut, the sound got stuck but the video played
fine. I found battle lags more in forest areas for some reason especially
magic casting. Other than that, I’ve had no other problems and I’m on Disc 4
but I’ll update if it changes. //Lufie101
Update:At the end of Disc 4, the game froze right after walking in
space. I was in a battle with the crystallized of the elemental bosses and
cast Quake and it froze. I switched the Popsloader to 4.01 and it worked fine
to the end of the game (FMVs and all).
M33-6 Using popstation
to load 3.80 emulation, settings Normal, Normal, +2, Fast, everything seems
to be all right on all discs, movies play with sound. If you have problems in
game, swap out Fast for Normal.
5.00 M33-6 Played through all 4 discs on multidisk eboot made with
First Multi-Disc Popstation GUI by akadewboy. Works 100% (including through
all side quests), without a single crash. Used Fast for disc load speed.
5.00 M33-6 Using a multidisk EBOOT, if you reset the game and load a
disc other than disc 1, and try to start a new game, it will ask you to
change discs. After you change discs to disc 1 the opening FMV will have
sound. -SlimJimGuyMan
Using 3.90 pops on my 5.00 m33-6 PSP with disc load speed set to fast,
my EBOOT worked fine and had sound on the intro FMV, I used PSX2PSP 1.4.2 to
convert mint .img disc images, used compression level 4, I have no idea why
me EBOOT works fine and has sound on the intro and others’ don’t… –
DebugJunky
5.50-D3 Using Debug
Junkies method of making the multidisc EBOOT seems to work flawlessly. Using
PSX2PSP make sure your compression level is set to 4 and hit convert. When
starting the game use popsloader 3.90 and have your disc load speed set to
FAST. Just finished the game with no mentioned lack of sound or other
glitches noted above. -Sithious
Final Fantasy IX/9
SLES-02965
PAL versions of
FFIX are copy- in order to play them, it’s necessary to fix the
images with the appropriate regional patches prior to conevrting them into
eboots. Game is perfectly emulated under POPS 3.80; lower versions originate
sound issues, due to the emulator skipping regional checks and forcing the
game to run at 60 HZ while it was retooled to run at 50.
M33’5 by PerfectCircle)
from Vildar:
Final Fantasy 9 PAL: Works fine in the 5.00 M33-2 firmware with the iso
patch. You can find the patch here: Final Fantasy IX Patch, and you will have to patch it With this ISO patcher tool.
Final Fantasy IX/9
SLES-02967
patch the images to
remove the protection. multidisc eboot made using PSX2PSP 1.4.2, works
perfectly with 3.72 pops, all pops versions above 3.72 have the problem of
not playing sound during the intro. – EasySan
Final Fantasy
SLUS-01541
Works perfectly on
5.00 M33-3 with 5.01 patches. Tested by Roxas6662.
Final Fantasy
SCUS-94221
Works perfectly on
5.00 M33-3. Tested by Chrisguy.
created by autopopstation 4, original game id, iso producer 1.1 for disc rip.
no slowdown/freeze/problems of any kind. Tested all the way through main
story and some side quests. 75UR15
Final Round
SLUS-00064
3.90 by 2PS
Firo & Klawd
SLES-00094
3.52 only – by 2PS
Fisherman’s Bait
SLUS-00802
5.00 M33-4 – works
SCES-00985
3.80 by 2PS
Flying Squadron
SLES-04156
3.80/3.52 – Sound
issues – by 2PS
Formula One 2001
SCES-03404
Tried demo
[SCED-03788] in 6.35 Custom Beta 17 fix2 and it’s pretty buggy and
unplayable. You cannot drive. Tested by largeroliker
SLUS-00458
Tested only
briefly, but seems to work perfectly on 5.00 M33-6
SLUS-00101
3.80 by 2PS
Championship 2000
SLUS-00925
SLUS-00506
Using CFW 5.00M33-6
Running on original from flash all working perfectly Tested by GrimeHavoc on
Frogger 2: Swampy’s
SLUS-01172
use 3.40/3.51 pops
(be