17阶魔方的世界纪录什么时候上市

17阶魔方到底有多难,全世界只有2个人完成过?_虎扑论坛
这个魔方要玩得转,手大反应快够敏捷,右脑开发到30%估计才会支持这种空间想象力和记忆力吧
竟然全世界只有2个人完成过
这些回帖亮了
超体个人认为算是2014年的一大烂片了
魔方帖转为超体帖
最多可上传 6 张图片
其他人正在看>>,,,>大神!7个半小时还原17阶魔方
大神!7个半小时还原17阶魔方
14:46:06条 来源:多玩 作者:多玩很会玩魔方的网友
史上最难魔方 ,1539个部件
处女座看了都说爽十七阶魔方,你见过吗?
今天在上逛,看到有个叫Oskar的牛人发布了一款十七阶的魔方,这真是令人惊讶。让我们先来看看照片。(转自此人的)
他今年1月27日的上写到,“十七”这个阶数打破了非正式的世界纪录。下面是原文以及我的粗略翻译(见笑)。
Oskar started designing his puzzles as a boy at the age of 12
in the Netherlands. More than 30 years later, he has a reputation
as one of the world's most prolific puzzle creators. Oskar first
started 3D printing twisty puzzles thanks to Bram Cohen, who began
posing challenges to Oskar back in 2008. Today, several of his
innovations are being sold in traditional toy stores and lots more
are available through 3D printing in his Shapeways Shop. Most
recently, Oskar's twisty puzzles have been used as a very original
way to propose.&
Oskar从12岁就开始于荷兰构思设计智力游戏了。三十多年过去了,他已然成为了誉满全球的智力游戏制造者。而Oskar开始研究魔方却得益于Bram
Cohen,他在2008年给Oskar的一个谜题令他开始这方面研究。今天,他的许多作品都在益智游戏商店有售,许多三维拼图玩具在他的网店有售。
When Oskar heard of the world records being set for twisty
puzzles,&like the 7x7x7, 9x9x9 and 11x11x11 by
Panagiotis Verdes from Greece, he wanted to try his hand at setting
a new record himself. With sponsorship from his close friend Claus
Wenicker, Oskar set about designing and testing a number of
prototypes, and his third attempt was printed successfully with
Shapeways. Sorting and dyeing all 1539 pieces took Oskar 10 hours
of work, followed by 5 hours of assembling. The result is an
oversized (140 millimeter, 5.5 inches) and fully functioning "Over
The Top" 17x17x17 puzzle.&
当他听说魔方世界纪录,比如Panagiotis
Verdes保持的七阶、九阶和十一阶纪录时,他想尝试一下这个挑战。在好友帮助下,他开始测试原型。终于,他的第三个模型成功了,花了10小时制作+5小时拼装,用了1539个零件拼出了这个作品。这是一个巨大的魔方(长宽高14厘米),并能成功运作。他为它取名叫做"Over
The Top"。
Oskar will be in New York City on Saturday Feb. 12th, where
he'll be unveiling his "Over the Top" cube.
Oskar将会在2月12日到达纽约,正式发布这个作品。
-------------------------------------------------------------------------------------------
但同时我觉得有些困惑。我以前见过有七阶的魔方(也做得非常有弧度,如下图),并听说有人证明了九阶以上的魔方是不能存在的(?),因为在机械结构上是不稳定的。
本人手上的五阶魔方有时候都会有POP(小块掉出来)的情况,那这个十七阶的魔方,是如何做到稳定的呢。观察这个魔方得出初步结论也只能是,它的角块和棱块比较大,在内部能够成功锁住相邻的零件。希望学结构相关的牛人能看出一些门道。
这十七阶货价格不菲。据他网店标价,需要两千刀,这还真……买不起。十七这个数字,还让我想到高斯当年只用尺规作出的十七边形,他是否也有这个意思呢?总之,要是能在地铁上神马的看到有人在转这十七阶的……会不会觉得非常酷,非常带感呢?
已投稿到:
以上网友发言只代表其个人观点,不代表新浪网的观点或立场。

我要回帖

更多关于 魔方3.17 的文章

 

随机推荐